I asked the question of crackkills to find out if there was perhaps a worn out seal or other problem with the injector. Therefore causing little or no pressure on the resin to force it into the break. Since there was no mention of resin flowing from the injector seal I figure there must be some other reason than a bad seal against the windshield or a blowout for the lack of resin flow into the legs of the star. As for a problem with the injector doing it's job that would only leave a lack of pressure forcing the resin. I also use a screw type injector (esprit). It's a plastic injector, but I get excellent repairs from it.

www.ohnonotagain.com</p>