Tooldini,
I use the same lamp as you do and have no problems. It sounds like you are seeing some excess resin coming from the injector after you remove it. Try this next time, after you first cure the repair, before you remove the injector,if you have the older type injector-before you take it off loosen the thumb screw and slighly pull the plunger up and then lock down the thumb screw, and then take the injector off. If you have the newer pro vac 2000, before removing the injector after the frist cure, unscrew the plunger for about half a round and then remove it.This should take care of the little problem you have.Then just put a drop of pit filler and a film tab and cure the pit, and scrape and then polish and collect payment.

</p>