Quote:
Originally Posted by SGT
Barry,
Certainly nothing new to what I was referring to. I guess the terminology "Anchor" I used in the sense of relieveing stress was misleading. I merely ment drill and pop. Sorry for the confusion. Not sure why you did not have success doing this though. I realize the crack ends that are blunt are very sensitive but you should be able to drill and pop. Personally I Drill slightly past the end of the crack and use very light pressure when drilling. I like to use various guage sewing needles and my tap stick(suction cup remover). Thats just what works for me.
Thank you for the compliment. Certainly one I will only ever be able strive for, but never achieve. There is only one and can only ever be one deserving of this.
|
Brian.
Thank you for your response in clarifying.
I did drill and pop a little bit down stream of the cracks, but the ones that I didn't have much success with where the ones with the square or as you describe them, blunt ends.
Those buggers would run right on into and thru and past the bullsye I poped!
I did not like leaving money laying on the table or one might say windshield.
Thanks again.
Barry