Re: Sealer or no sealer
Here is my take on the situation I have used a system that buffs of the damage in the past and it did an ok job but after awhile the Headlights started to fog back up I have a good friend who is an engineer working in plastics and acrylics his answer was that plastics etc are a petrol based product once the surface is broken with chemical of abrasives they will ten to dry out and also let other chemicals in through pores If you put a sealer on it will eliminate this
I now use a system where the damage is sanded off using a petrol based lube then wiped with a prep with a final sealer coat applied with a foam brush I get a long term good looking fix with little effort (20 minutes tops)
Works for me
|