Re: Curing under pressure.
I like to cure under pressure in most cases I find the fill is better I know delta and some others dont approve of it and with that type of injector you may end up prone to problems im not sure . With the LR injector it doesnt seem to have and problems. The science answer would be when you remove the injector and relieve the pressure you will have some back pressure allowing some air in or resin to back out If you leave it under pressure to cure this doesnt happen but for whatever the reason I personaly prefer the result with a Pressure Cure I take the cover off allow the sun to hit things for a couple minutes remove the injector apply cure tab and cure normally
|