[GlassStarz]

I use the craftmen 19.2v I have in the box for my paint system I use the 3m hook it system and buy the discs 600 grit and 1200 grit I use the Headlight Doctor system apply the 1st liquid with the sanding (600)after a couple minutes 90% are where they need to be Then i switch to the 1200 when done I do a light hand sanding apply the 2nd fluid wipe off then put on the topcoat average 10 per car start to finish I have been useing the same cordless drill for 3 years only downside to the craftsman is 1 hr rechsrge but I have 6 batteries in the box so no biggy. For me it didnt make sence to buy a special tool when I already had one in the box that does a great job Here in Fresno it gets to 110 deg and stays there for weeks at a time have seen some pretty nasty lights havnt found any I couldnt do in 10-15 minutes I have a customer in Vermont that I do 10 - 15 sets at a time every other month never there more than 3 hrs(I have given my son the Vermont portion of the buisness I think I am staying here)