[SGT]

I do not want to debate the technique anyone else uses. To each there own and I respect that. IMHO though, if you are drilling to speed the process up then you will not be getting the best possible cosmetic outcome. If it is becuse your equipment cannot do structual repairs otherwise then you are forced into a necessary evil which with other equipment(DK) is not necessary.

We use Delta Kits tooling and also only drill when it is required to have a structurally sound repair which is rare on most chips. Cracks, I always drill and anchor for structural purposes. This is not hype, false information or anything else, just a fact of capabilities of the equipment we use coupled with a little skill.

Just something to think about...If you drill every repair at least be willing to consider it may not be needed. Try it without drilling using your equipment. If you can fill without drilling then you have to ask yourself what your reasons for drilling are. If you cannot fill with out drilling then ask yourself why not and be willing to consider that it is possible with other systems.

By all means anyone who is questioning the need to drill or just does not think a repair can be done without drilling should go to DK training and see first hand.

If at the end of the day you do not care and drill every repair, Tom Dick or Harry may not agree but it is your and only your decision to make.