I had some informal training on how to do windshield repair, and I can fix a chip in about 5 minutes. But I called some glass shops, and they said it takes about 45 minutes to an hour to repair. First I drill, clean out the chip with some acetone, blow it out with canned air. Place my bridge aplicator over the chip, use the pick to apply some pressure to open it up, put in a couple of drops of resin, tighten down the plunger, wait a minute, apply some heat if needed. unscrew the plunger, place a clear tab, let sit for a minute, scrape. I can do all of that in about 5 minutes, is this normal, or are other places just slow? Generally all of my repairs dissapear about 80 percent.

</p>