Mike C,

Welcome to windshield repair and the Forum.

Mike I would say that as long as you can stand the temp. outside then by all means do all the repairs you want.

Remember to:

1. Warm the windshield to your manufacturers specs until you determine what you prefer. I personally try to get the glass to a temp. of 70 deg.

2. I would not use the defroster though. If glass is cold soaked and you introduce direct temp. extremes this may cause the damage to become a complete loss. Try using the heater instead to bring the glass to desired temp subtlely.

3. I would also check with your manufacturer for their resin spec's in cold weather applications.

4. Make sure you cure properly.

Hope this helps and good luck.



Pay it foward,

Brian
www.safeglasstechnologies.com

info@safeglasstechnologies.com</p>