I was glad to see Melee say to leave them in if they are below the surface. Attempting to remove them can really make a big mess if you arent careful. I have been fortunate. So far only a few tips have broken off. If the broken end protrudes above the surface of the glass, it should be removed. Usually it can be pulled out with a good pair of needle nose plyers. Occasionally, you might have to drill next to the broken piece just enough to give it 'wiggle room'. People dont usually look at their windshield from any closer than 2 to 3 feet, and from that distance, they would have to really be looking hard to even see the repair site, let alone if there is a broken tip in it. Certainly, if it can be easily removed without doing further damage, do so. Otherwise, just leave it in there.

</p>