Page 1 of 1

Hello All!

Posted: September 12th, 2008, 3:40 pm
by AGSD
...just joined the forum and wanted to say hello to the folks who are present members.

The main reason I created an account for our company was to locate some information on the reset function of some power windows...newer Benz' and Acura door glass jobs have left us wondering how to reset the travel allowance for the regulators.

Is there going to be a door glass portion to this forum? Did I miss it at the front door?

At any rate, hello to all and have a smooth weekend.


AGSD sends

Re: Hello All!

Posted: September 12th, 2008, 4:38 pm
by sunshine wr
try this website I've seen post on this subject here http://pub24.bravenet.com/forum/show.ph ... 4146&cpv=1

Re: Hello All!

Posted: September 12th, 2008, 6:03 pm
by Brent Deines
Welcome to the windshield repair forum AGSD. Not all that many active replacement guys here, but there are a few. If you don't find an answer on the GlassBytes forum, the place to ask on this forum is windshield-replacement/

Good luck!

Re: Hello All!

Posted: September 17th, 2008, 7:09 pm
by AGSD
Thanks to you both. Both links were of value and I thank you guys for the direction.