No problem, I hope it helps you out.Once again your insight on all of this is truly appreciated. With the polish that you use how long does it take to cure. Also while applying the polish do you just apply it by hand and thats it, or do you also use some type of buffer pad or the polishing disc along with it??
The polish is machine applied with an orange Delta pad, medium pressure, after the final sanding disc (1200,1500).
It's equivalent to 3000 grit and the results are instant clarity, has to be seen to be believed.
A quick wash off with water, dry and then apply your coating of choice. I use a 12v hair dryer to dry the coating and the cure takes about 10 mins max.
I'm not sure I can tell you in the forum of the brand of polish?
I did try the Delta orbital with my polish and it didn't work. I use a normal drill which does a great job or the cordless which does it a little slower as you can't press as hard.
Cheers
Pommy