Infinity Results - Start to finish
- pommy
- Member
- Posts: 258
- Joined: August 24th, 2011, 11:20 pm
- Enter the middle number please (3): 3
- Contact:
Infinity Results - Start to finish
Hi all -
Here is my process for HLR, using Infinity as the UV protectant.
If you're thinking of starting a HLR business, these are the results you can expect to achieve...
Before pics:
Sanding Pics:
400 Grit (Notice the TINY 3" Lithium-Ion sander/polisher, just a bit bigger than the sunglasses and no more leads!):
600 Grit:
1200 Grit
1500 Grit (not always used):
Polish:
Finished with Infinity:
Before & After Comparison:
Here is my process for HLR, using Infinity as the UV protectant.
If you're thinking of starting a HLR business, these are the results you can expect to achieve...
Before pics:
Sanding Pics:
400 Grit (Notice the TINY 3" Lithium-Ion sander/polisher, just a bit bigger than the sunglasses and no more leads!):
600 Grit:
1200 Grit
1500 Grit (not always used):
Polish:
Finished with Infinity:
Before & After Comparison:
If the job doesn't mean more than the pay, it will never pay more.
-
- Member
- Posts: 450
- Joined: November 15th, 2009, 12:08 pm
- Enter the middle number please (3): 3
Re: Infinity Results - Start to finish
who makes the 3" Lithium-Ion sander/polisher? I thought it looked like a Milwake but I was ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, Wrong.
Just Chippen Away
-
- Senior Member
- Posts: 1058
- Joined: April 12th, 2008, 8:47 pm
- Enter the middle number please (3): 5
- Location: U.S.
- Contact:
Re: Infinity Results - Start to finish
just chippen away wrote:who makes the 3" Lithium-Ion sander/polisher? I thought it looked like a Milwake but I was ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, Wrong.
ACDelco.
-
- Member
- Posts: 450
- Joined: November 15th, 2009, 12:08 pm
- Enter the middle number please (3): 3
Re: Infinity Results - Start to finish
I just found it as you were posting.... I was going to delete my post but can not.. Wonder how long the battery lasts?
Just Chippen Away
-
- Senior Member
- Posts: 742
- Joined: June 16th, 2009, 11:28 pm
- Enter the middle number please (3): 3
- Location: NC
- Contact:
Re: Infinity Results - Start to finish
Thats what the majority of mine look like. I am not too sure about using a drill. If I can find an orbital that has a btry pack I would use it. How expensive is the one shown in the photo? There are times I could use a Btry sander if its powerfull enough. The headlights look really good (WOW). The very first time I did a HLR I had that same result. I was so nervous. The owner looked at the lens prior to using the C2P and he was a little upset. After I applied the UV it was an instant success. I dont regret buying the HLR kit. It also paid for the WSR kit and trip across country to Oregon as wel,l within the first 6 months. Can you post some information on that drill.
- pommy
- Member
- Posts: 258
- Joined: August 24th, 2011, 11:20 pm
- Enter the middle number please (3): 3
- Contact:
Re: Infinity Results - Start to finish
Hi Candyman,
It's not a drill buddy - it's a heavy duty polisher/sander, although it IS rotary.
I love it!
You can also buy a 3" sander with rechargeable batteries too, not the same brand as Delta Kits- they are available in heaps of places - this is what they look like:
It's not a drill buddy - it's a heavy duty polisher/sander, although it IS rotary.
I love it!
You can also buy a 3" sander with rechargeable batteries too, not the same brand as Delta Kits- they are available in heaps of places - this is what they look like:
Last edited by Kgobin on January 9th, 2012, 6:02 am, edited 1 time in total.
Reason: removed URL and added images
Reason: removed URL and added images
If the job doesn't mean more than the pay, it will never pay more.
-
- Senior Member
- Posts: 742
- Joined: June 16th, 2009, 11:28 pm
- Enter the middle number please (3): 3
- Location: NC
- Contact:
Re: Infinity Results - Start to finish
Thanks for the information. I will look these up in a few minutes. I wasnt expecting a response so quick. Iam normally on here between midnighht & 7am Sun Through Friday east coast time.
-
- Senior Member
- Posts: 742
- Joined: June 16th, 2009, 11:28 pm
- Enter the middle number please (3): 3
- Location: NC
- Contact:
Re: Infinity Results - Start to finish
I found an 3in mini polisher acdelco 12V Li-on at empire: Is that the same as yours?
- pommy
- Member
- Posts: 258
- Joined: August 24th, 2011, 11:20 pm
- Enter the middle number please (3): 3
- Contact:
Re: Infinity Results - Start to finish
It's the ARS1207 - comes with 2x rubber 3" pads, 30min charger and TWO lithium-ion batteries.
If the job doesn't mean more than the pay, it will never pay more.
-
- Senior Member
- Posts: 742
- Joined: June 16th, 2009, 11:28 pm
- Enter the middle number please (3): 3
- Location: NC
- Contact:
Re: Infinity Results - Start to finish
Thats the one. Do you use the pads from delta kits and disc?
Who is online
Users browsing this forum: No registered users and 32 guests