Las Vegas Training and Certification Course

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.

Las Vegas Training and Certification Course

Postby Jonathan » July 23rd, 2010, 9:08 am

Delta Kits will be holding an on-the-road training and certification course in Las Vegas on Oct. 9, 2010. This is the Saturday before NACE. The full day training class will be held at the Hampton Inn Tropicana. Space is limited and reservations will be taken on a first come, first serve basis, so you must call in to Delta Kits to get signed up. Due to shipping needs, the cut-off date for getting signed up is Sept. 30, 2010. For questions or more information, give us a call today!
Jonathan Powell
Delta Kits, Inc.
Image
Jonathan
Moderator
 
Posts: 62
Joined: March 5th, 2009, 9:49 am
Location: Eugene, OR

Re: Las Vegas Training and Certification Course

Postby Frank EU » July 23rd, 2010, 9:37 am

I would recommend this to anybody, newbie or experienced.
Newbies will be saving time and shorten their learning curve, a technical training should be mandatory in my opinion, just to bring our trade to a higher level.
Experienced guys will pick up information they may have been overlooking or even ignoring for a long time and/or be technically refreshed.
Frank EU
Senior Member
 
Posts: 561
Joined: December 13th, 2005, 9:01 am
Location: Europe & USA

Re: Las Vegas Training and Certification Course

Postby SGT » July 23rd, 2010, 12:30 pm

I agree with Frank 100%.

Old timers do not overlook this. It is easy to become complacent once you get set in a daily routine. I took the training a second time when I flew my Dad out for his certification and a refresher is always good at any technical level. I probably will take a another in the future if they will have me back. Maybe this time I will pass!!!
Safe Glass Technologies

Image
2008 WRO Silver
2009 WRO Gold
2009 WSRPOTY
SGT
Senior Member
 
Posts: 868
Joined: August 11th, 2003, 7:39 am
Location: Pennsylvania

Re: Las Vegas Training and Certification Course

Postby Ca$h » July 28th, 2010, 8:46 pm

Is the Tropicana on the strip? how much is the training?
[b]"Life is a journey that requires constant course corrections to stay on track"[/b]
Ca$h
Junior Member
 
Posts: 22
Joined: July 21st, 2010, 8:56 pm
Location: Houston, TX

Re: Las Vegas Training and Certification Course

Postby Jonathan » July 29th, 2010, 8:35 am

Ca$h,
I just emailed you some info about our Las Vegas Training.
Jonathan Powell
Delta Kits, Inc.
Image
Jonathan
Moderator
 
Posts: 62
Joined: March 5th, 2009, 9:49 am
Location: Eugene, OR

Re: Las Vegas Training and Certification Course

Postby Ca$h » July 29th, 2010, 1:16 pm

Got it thank you!
[b]"Life is a journey that requires constant course corrections to stay on track"[/b]
Ca$h
Junior Member
 
Posts: 22
Joined: July 21st, 2010, 8:56 pm
Location: Houston, TX

Re: Las Vegas Training and Certification Course

Postby speedyprowsr » August 10th, 2010, 3:57 pm

Jonathan,

Could you please email me the information about the upcoming training in Las Vegas.

Thanks................Karl
speedyprowsr
Junior Member
 
Posts: 15
Joined: July 3rd, 2009, 4:00 pm
Location: Green Valley, Arizona

Re: Las Vegas Training and Certification Course

Postby Jonathan » August 10th, 2010, 4:42 pm

speedyprowsr,

It has been emailed to you.
Jonathan Powell
Delta Kits, Inc.
Image
Jonathan
Moderator
 
Posts: 62
Joined: March 5th, 2009, 9:49 am
Location: Eugene, OR

Re: Las Vegas Training and Certification Course

Postby speedyprowsr » August 11th, 2010, 8:17 am

Thank You Jonathan.
speedyprowsr
Junior Member
 
Posts: 15
Joined: July 3rd, 2009, 4:00 pm
Location: Green Valley, Arizona

Re: Las Vegas Training and Certification Course

Postby John M. » August 18th, 2010, 12:49 pm

Thinking of purchasing the ezk321 and attending the Las Vegas training.
Any way you can send me more info on the training..

Thanks,
john m
John M.
Junior Member
 
Posts: 2
Joined: August 15th, 2010, 8:14 am

Next

Return to Windshield Repair

Who is online

Users browsing this forum: No registered users and 3 guests