H3 Finally had my chance to work on one.
Lots of parts to take off but its fairly simple.
Outside Apiller 2 "X" Head Screws that are under the rubber door trim.
The lump or fake breather intakes.. Those just come strait up.
No screws no panel tools gab and pull up.
Picture to show what I'm talking about because I don't honestly see the purpose of these things besides cosmetics.
http://img95.imageshack.us/my.php?image=06h3ov6cm.jpg
15MM WindShield Wiper Nuts
4 push Pins that are easy to take off but are also easy to break.
Lined the front part of the 2 piece cowl.
The cowl we had a problem with. Care is probly best when working on it.
To many ways to damage the cowl.
The cowl has 2 Pieces Top and bottom.
You want to take off the top part which is the part you see from outside the car. In these pics "Yellow" part. Before you can take out the bottom part.
Top Part underside.
http://img97.imageshack.us/my.php?image ... btm3ka.jpg
The bottom cowl also has 3 windshield wiper hoses to disconnect before you can remove it. Hummer could of done better on this. Remember which is which.
WindShield has stops.
Standard Mirror tool works.
Hope this helps enjoy.
06 H3
- Paranoia
- Junior Member
- Posts: 11
- Joined: March 4th, 2006, 10:05 pm
- Enter the middle number please (3): 5
- Location: Oklahoma
- Contact:
06 H3
WindShield Installer / HardCoRe Gamer
I work hardcore I play hardcore.
http://www.virusclan.org
The Infection Starts Here
I work hardcore I play hardcore.
http://www.virusclan.org
The Infection Starts Here
Who is online
Users browsing this forum: No registered users and 1 guest