Windshield Repair Forum

BRAND NEW GLASS TECHNOLOGIES STARTER KIT, JUST PURCHASED.

COMES WITH EVERYTHIING YOU WILL SEE ON THEIR WEBSITE FOR THE SPECTRUM KIT.

THE KIT I BOUGHT COST ME $695.00.

I GUESS, I AM OLD SCHOOL, BUT I CAN'T GET USE TO THE PLUNGER TYPE STYLE OF IT AND WOULD LIKE TO PURCHASE ANOTHER KIT, WITH DIFFERENT STYLE INJECTOR.

I HAVE USED THIS KIT ON THREE REPAIR ONLY. IF YOU HAVE ANY QUESTIONS ABOUT THE KIT OR WOULD LIKE TO CONTACT ME ABOUT IT PM ME.

AGAIN I PAID $695.00 LESS THAN A WEEK AGO.

WILL SELL FOR $500.00

COMES WITH INSTRUCTIONAL VIDEO AND MANUAL.

Why are you yelling at us?

DryStar wrote:Why are you yelling at us?

Because you were not listening!

Okay so the Spectrum Starter kit includes the following items:

20x15x9 heavy duty case, all with foam compartments inside for storing components (see pics)

1- Prism Technology Injector and Bridge Assembly

12 Volt Blue curing lamp with four suction cups on it.

Rechargeable Dremil with charger and battery

Five Drill bits for the dremel

MV Resin (medium velocity for all common breaks) should do 100 repairs, I have done three.

PF Resin (Pit Fill Resin) Enough for 300 repairs

Injector Tip White Oring, one in injector and (5 extra)

Five Plunger Oring Replacements

Five side load O Ring Replacements

1 Package of 25 Mylar Squares

1 Razor Blade

1 15cc HV resin for lubing the seals prior to your day (only the plunger and the side resin load) not the injector O Ring

1 Large bottle of suction cup lube

1 Large bottle of pit polish

1 3" Mirror with suction cup

1 Bullseye Maker tool

Extras: (not part of the kit) But I will include:

One Large Pit Adaptor for the Injector also for use on Semi's, Buses etc, when using on a vertical windshield= 12.95

One roll of curing tape roll which is 100 feet long. This is used for crack repair= $3.95

SO I paid $695 for the kit, plus $16.90 for the extras, comes to a total of $711.90.

So $500 is a good price!

Jeff,

Your new ad looks so much better without the "CAPS". Seems like a fair price to me. If your confident with your repairs with this kit why not list it Craigs? I sold a few of mine in the past and collected an additional training fee. Something to consider

DryStar wrote:Jeff,

Your new ad looks so much better without the "CAPS". Seems like a fair price to me. If your confident with your repairs with this kit why not list it Craigs? I sold a few of mine in the past and collected an additional training fee. Something to consider

Not a bad idea, Drystar. I did consider that, but then I thought to myself, what if someone buys it from me here, then all of a sudden I have another competitor amongst many others. So I would prefer to sell it to someone away from me...make sense. Plus I am not even out there networking yet, so the last thing I need is another competitor. LOL

I have not been able to figure out how to delete posts on here yet, otherwise there would be a couple I would remove.

You have a limited amount of time to delete your posts. After that just send a note to one of the moderators and we will do it for you.

SMITHY wrote:

DryStar wrote:Jeff,

Your new ad looks so much better without the "CAPS". Seems like a fair price to me. If your confident with your repairs with this kit why not list it Craigs? I sold a few of mine in the past and collected an additional training fee. Something to consider

Not a bad idea, Drystar. I did consider that, but then I thought to myself, what if someone buys it from me here, then all of a sudden I have another competitor amongst many others. So I would prefer to sell it to someone away from me...make sense. Plus I am not even out there networking yet, so the last thing I need is another competitor. LOL

I fully understand your concern. I never sold kits or trained others within my working area. They were normally 30-60 miles out which never effected me. It was just a suggestion, that's all.