Page 1 of 6
Infinity Results - Start to finish
Posted: January 7th, 2012, 5:06 pm
by pommy
Re: Infinity Results - Start to finish
Posted: January 8th, 2012, 6:42 am
by just chippen away
who makes the 3" Lithium-Ion sander/polisher? I thought it looked like a Milwake but I was ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, Wrong.
Re: Infinity Results - Start to finish
Posted: January 8th, 2012, 6:58 am
by t4k
just chippen away wrote:who makes the 3" Lithium-Ion sander/polisher? I thought it looked like a Milwake but I was ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, Wrong.
ACDelco.
Re: Infinity Results - Start to finish
Posted: January 8th, 2012, 7:03 am
by just chippen away
I just found it as you were posting.... I was going to delete my post but can not.. Wonder how long the battery lasts?
Re: Infinity Results - Start to finish
Posted: January 8th, 2012, 11:33 pm
by candyman
Thats what the majority of mine look like. I am not too sure about using a drill. If I can find an orbital that has a btry pack I would use it. How expensive is the one shown in the photo? There are times I could use a Btry sander if its powerfull enough. The headlights look really good (WOW). The very first time I did a HLR I had that same result. I was so nervous. The owner looked at the lens prior to using the C2P and he was a little upset. After I applied the UV it was an instant success. I dont regret buying the HLR kit. It also paid for the WSR kit and trip across country to Oregon as wel,l within the first 6 months. Can you post some information on that drill.
Re: Infinity Results - Start to finish
Posted: January 9th, 2012, 1:14 am
by pommy
Hi Candyman,
It's not a drill buddy - it's a heavy duty polisher/sander, although it IS rotary.
I love it!
You can also buy a 3" sander with rechargeable batteries too, not the same brand as Delta Kits- they are available in heaps of places - this is what they look like:

Re: Infinity Results - Start to finish
Posted: January 9th, 2012, 2:30 am
by candyman
Thanks for the information. I will look these up in a few minutes. I wasnt expecting a response so quick. Iam normally on here between midnighht & 7am Sun Through Friday east coast time.
Re: Infinity Results - Start to finish
Posted: January 9th, 2012, 2:58 am
by candyman
I found an 3in mini polisher acdelco 12V Li-on at empire: Is that the same as yours?
Re: Infinity Results - Start to finish
Posted: January 9th, 2012, 3:54 am
by pommy
It's the ARS1207 - comes with 2x rubber 3" pads, 30min charger and TWO lithium-ion batteries.

Re: Infinity Results - Start to finish
Posted: January 9th, 2012, 4:23 am
by candyman
Thats the one. Do you use the pads from delta kits and disc?