Windshield Repair Forum

This windshield repair forum will be used for the benefit of windshield repair technicians, regardless of their equipment manufacturer.
https://www.windshield-repair-forum.com/

Proccess for newer headlights with no peeling of UV coating

https://www.windshield-repair-forum.com/viewtopic.php?t=8917

Page 1 of 1

Proccess for newer headlights with no peeling of UV coating

Posted: December 28th, 2015, 3:14 pm
by clearvision
How would you approach no peeling /lifting but just clouded headlights that are fairly new?

I cant see trying to sand off a coating that is still intact,or is this wrong ?

Thanks!

Re: Proccess for newer headlights with no peeling of UV coating

Posted: January 4th, 2016, 4:40 am
by Aussie lights
I would use 3000 or a bit of none silicon polish then clean to prep , then coat with infinity 4.1 as long as it come up good after you cleaned it. If not it could be on the inside of the headlight.

Re: Proccess for newer headlights with no peeling of UV coating

Posted: January 4th, 2016, 9:33 am
by clearvision
Thanks Aussie!
All times are UTC-07:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited