|
|||||||
|
Welcome to the largest Windshield Repair Forum in the world. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. |
![]() |
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
anyone know how to take off rain sensor?
thanks |
|
#2
|
|||
|
|||
|
Some can be removed with a thin heated putty knife, but others require special tools and/or procedures. I've been out of the replacement side too long to be of much help here, but the following sites may give you a place to start researching while you wait for replies from technicians more qualified to answer than me.
Some people remove them because the are not working properly and they do not want them replaced, but if you are intending to replace it or re-attach the original one you will likely need a kit from the manufacturer or an after market source. Your glass supplier should be able to help you with special tools, kits, and replacement pads. http://equalizer.com/mm5/merchant.mv...gor y_Code=22 http://www.usglassmag.com/AGRR/Backi...ainsensors.htm
__________________
Brent Deines Delta Kits, Inc. Last edited by Brent Deines : 12-22-2007 at 07:14 PM. |
|
#3
|
|||
|
|||
|
Just pulled a sensor off of a Cayenne. Heat up outside of glass at sensor with torch or heat gun. Use thin screwdriver sensor pops out. Mirror holds everything toghether. HTH
|
|
#4
|
|||
|
|||
|
How about putting on new w/s??
|
|
#5
|
|||
|
|||
|
w/shield has peremiter bracket on it . sensor isn't stuck to glass. Mirror holds sensor to glass. Sensor seems to be stuck to glass but isn't. after a while the sensor will seem to be stuck but heat releases it. HTH
|