Search found 9 matches

Return

by Clarity Glass
August 9th, 2014, 8:25 am
Jump to forum
Jump to topic

Re: Let's here your plan for this damage!

HBCC I've never cracked a chip out by using slide hammer on original break. That being said there are additional stresses from heat and manufacturing on edge of w/s so proceed with caution. The only chips I've had grow with slide hammer are from drilling tips. I've had 17 w/s crack out in 11 years.....
by Clarity Glass
August 20th, 2014, 9:39 pm
Jump to forum
Jump to topic

Re: Long cracks

Probably 95% of my business is chips. Chips are much quicker and you can do multiple w/s at the same time. That being said I still couldn't resist doing crack repairs. I started thinking how many cracks I was passing up on a weekly basis. Just like chip repairs you need to inform the customer the cr...
by Clarity Glass
March 17th, 2016, 8:09 pm
Jump to forum
Jump to topic

Re: Suface chip - no visible break

I would probe the chip to check for a tight crack or moisture. If it is just a pit and I'm not real busy I will offer to fill it free of charge to make it look better and reduce likelihood of wiper streaks. My business is all retail so this for me is goodwill. Take care of the customer and they will...
by Clarity Glass
August 6th, 2017, 8:30 pm
Jump to forum
Jump to topic

Repairs in HUD area

Last posts I found on this were about 10 years old. As heads-up-displays have become more common, is there anymore feedback/studies on doing repairs in this area? Recently had insurance agent friend who inquired for one of his policyholders.
by Clarity Glass
April 27th, 2018, 6:55 pm
Jump to forum
Jump to topic

Re: Is this worth getting repaired?

Yes. I'm biased but I recommend finding a repair only technician by checking review sites.
by Clarity Glass
May 13th, 2018, 10:13 am
Jump to forum
Jump to topic

Re: Toyota prius windshield cracking out?

I don't treat a Prius windshield any differently than other models. For all vehicles be careful of chips at edge of w/s due to more stress there, pay attention to temperature of w/s and resins, and follow procedures to set up injector. When I started in the business 15 years ago, the first six month...
by Clarity Glass
September 2nd, 2018, 9:13 am
Jump to forum
Jump to topic

Re: Safelite Help

In my disclaimer at bottom of invoice it states "customer will pay any fees not covered by insurance." I do the repair anyhow because experience has shown coverage will most likely be confirmed within a day or two. When "no coverage" comes back then I call them for payment. Most people are honest an...
by Clarity Glass
September 13th, 2018, 9:42 pm
Jump to forum
Jump to topic

Re: SGC online billing set-up

Set up online billing through sgc.safelite.com. Literally takes 1-2 minutes to submit invoice. No scanning or emailing. Lynx and Gerber you'll still need to though. Feel free to call me...Steve down in Vancouver.
by Clarity Glass
February 12th, 2019, 10:07 pm
Jump to forum
Jump to topic

Re: Side Glass Repair?

Same as a windshield. My experience is the CSR will have to get a supervisor involved. The two i've done they billed as windshield repair.