Search found 7 matches

Return

by Brent Deines
May 26th, 2015, 5:36 am
Jump to forum
Jump to topic

Re: Mighty Vac

You don't need any special equipment to do long cracks so I don't know why you would avoid them. The Mighty Vac is not good for most long cracks because most long cracks are on the surface. If you apply a strong vacuum to a surface crack you will just pull air into the crack from the surface! Save t...
by Brent Deines
August 1st, 2016, 9:28 am
Jump to forum
Jump to topic

Re: Fear the drill and tap??

I highly recommend practicing on scrap windshield until you are getting consistant results every time. Using a slide hammer or spring hammer in conjunction with a tapered .047 carbide bur will take much of the guesswork out of it. My preference is the spring hammer because your only concern is how d...
by photoadjuster
December 26th, 2010, 3:42 pm
Jump to forum
Jump to topic

Re: Customer sketchy when paying with credit card w/ Mobile APP

The only downside to SquareUp is the extra 15 minutes it takes to tell the customer where to get one. They always want one.
by Brent Deines
August 24th, 2015, 2:52 pm
Jump to forum
Jump to topic

Re: Anyone have multiple tent locations ??

5 repairs/day x 5 days/week x 52 weeks/yr x $50/repair = $60,000. 5 repairs/day x 6 days/week or 6 repairs/day x 5 days/week x 52 weeks/yr x $50/repair = $78,000. Are there technicians who make more? Absolutely. Are there technicians who make less? Definitely. 5 repairs per day because it's not an u...
by bill lambeth
August 26th, 2015, 2:06 pm
Jump to forum
Jump to topic

Re: Anyone have multiple tent locations ??

Location Location Location ! Here you are not going to find to many places that will let you do it .
by kennycrane
October 17th, 2016, 3:41 pm
Jump to forum
Jump to topic

Re: Fear the drill and tap??

I prefer the slide hammer, just allows me to use the amount of impact that I am comfortable with. When attempting to stop a crack one word of advice, first thing make sure that the crack is on outside layer of glass and not on inside layer. You can usually do this with a probe, fingernail or razorbl...
by joeym056
July 13th, 2017, 7:35 pm
Jump to forum
Jump to topic

Re: air in chip can i redo

Yes sir. I will not give up. I really enjoy this business.