Search found 36 matches

Return

by David T
July 6th, 2009, 9:00 pm
Jump to forum
Jump to topic

Re: delta kit vs glass mechanix

Welcome to the forum ecatrods, You pose some interesting questions. First off, no matter what kit you end up choosing, there is no better source of information (about all aspects of WSR) than this forum. If you take the time to learn how to use the "search" feature on the forum, you will find that t...
by benswindshieldrepair
May 4th, 2018, 9:37 pm
Jump to forum
Jump to topic

Re: New and Self employed

If time and money are not a huge issue for you, then by all means, learn by trial and error for a few months on junk windshields. But if this is going to be your bread and butter, you should put some money out there on the front end and go to Eugene to get trained. You will learn very quickly things...
by t4k
February 20th, 2013, 6:04 am
Jump to forum
Jump to topic

Re: What is the best drill size and voltage, Such as dremel

I'm glad to see this post on here. I need to order some new bits and lke to hear what everybody else is using. I also need to do something about my Dremel, it doesnt hold a charge at all. I get maybe 1 or 2 chips out of it before it needs to be charged. WOW, I have a Dremel I got from Delta. It's a...
by Mr Bill
September 9th, 2014, 9:06 am
Jump to forum
Jump to topic

Re: Cracks

Have you searched the archives of this forum for your answers? Cracks have been discussed thousands of times. What is the point in having a forum , if you cannot ask questions of fellow members? Certainly, crack questions have been asked before, but if all the questions have been answered before, y...
by Dave M
December 3rd, 2016, 4:07 pm
Jump to forum
Jump to topic

Re: Which kit to start with?

So which system are you using? Are we suppose to guess?!
by Brent Deines
July 26th, 2016, 9:59 am
Jump to forum
Jump to topic

Re: My first repair

I agree with screenman that before and after pictures would be helpful but they don't always tell the whole story either. Something that concerns me is that you said you couldn't see detect an "open hole" for the resin to flow into and you did not see the resin flow into the legs of the star break, ...
by kennycrane
May 8th, 2018, 6:59 am
Jump to forum
Jump to topic

Re: New and Self employed

I am a Delta man, I cure under pressure often. Usually on larger breaks. sometimes it is all but impossible to get all of the trapped air out again especially on larger breaks when I see on the vacuum cycle that there is still air trapped I will add more resin to make sure It is plenty and then cure...
by chips1144
May 9th, 2018, 8:22 am
Jump to forum
Jump to topic

Re: New and Self employed

KCBen, let me make it easier for you, ever hear that phrase, "KEEP IT SIMPLE" ??? Then why buy a more expensive and more complicated system, I bought from Delta's competition years ago, l regretted it later.  Ever hear of people creating a problem and then only them having the solution so it makes t...
by Brent Deines
May 8th, 2018, 5:20 pm
Jump to forum
Jump to topic

Re: New and Self employed

Can you cure under pressure using Delta Kits equipment? Of course! And far be it for me to tell you not to if you you get the results you and your customers desire by doing so. I just think it is very important to tell you there is no "need" to cure under pressure with a Delta Kits system. I believe...
by New2chiprepair
May 12th, 2018, 2:30 pm
Jump to forum
Jump to topic

Toyota prius windshield cracking out?

Hello, I attended the certification coarse not too long ago and I remember them mentioning that prius windshields crack out easier than most other windshields. I was wondering who experienced this themselves and if it cracked out most of the time. I'm asking because I had someone with a prius come t...