Search found 27 matches

by jdn
April 5th, 2019, 7:09 am
Forum: Windshield Repair
Topic: Curing under pressure
Replies: 14
Views: 2386

Curing under pressure

I see online there’s alot of people curing under pressure. They put the curing light right up against the injector. My question is what keeps the resin from curing at the injector tip or in the injector.
by jdn
August 11th, 2018, 3:05 am
Forum: Windshield Repair
Topic: Accidentally drilling all the way through
Replies: 8
Views: 1657

Re: Accidentally drilling all the way through

Thanks for the replies but my question was this. If you accidentally drill all the way through the first layer of glass is it still possible to do a good repair. If someone drills all the way through the entire windshield they need to have their drill taken away. Haha!
by jdn
August 10th, 2018, 6:48 pm
Forum: Windshield Repair
Topic: Accidentally drilling all the way through
Replies: 8
Views: 1657

Accidentally drilling all the way through

Has anybody ever accidentally drilled all the way through the first layer of glass. And if so is it still possible to do a quality repair?
by jdn
March 13th, 2018, 8:08 pm
Forum: Windshield Repair
Topic: Company car
Replies: 5
Views: 1092

Re: Company car

I use my personal vehicle. I do wsr on the side so I don’t have a need for a company vehicle just yet. If business keeps growing like it is I’ll probably get a gas saver hatchback. As long as you’re vehicle is clean, presentable, and doesn’t leak oil on your customer’s driveway that’s most important.
by jdn
March 11th, 2018, 10:24 am
Forum: Windshield Repair
Topic: Greetings and introduction
Replies: 2
Views: 850

Re: Greetings and introduction

I would suggest have a bottle of resin just for practicing. If you haven’t used the whole bottle, you haven’t practiced enough. Also if you can’t make it to a training class, use the tech support. Delta Kits has great tech support. Good luck!
by jdn
February 16th, 2018, 3:06 pm
Forum: Windshield Repair
Topic: Vacuum pump style repair system
Replies: 5
Views: 1557

Vacuum pump style repair system

Anybody have experience using the electric pump style repair system. I saw a few videos on line. Was just wondering how they compare to the hand operated bridge that most of us use.
by jdn
February 7th, 2018, 7:15 pm
Forum: Windshield Repair
Topic: Drilling
Replies: 1
Views: 973

Drilling

Is it always necessary to pop a bullseye when drilling into a break? Or can you just drill and then fill?
by jdn
January 31st, 2018, 6:44 pm
Forum: Windshield Repair
Topic: Need advice on a chip repair
Replies: 2
Views: 1532

Need advice on a chip repair

I have a chip a little smaller than a quarter. It has a pretty significant impact point and it has 2 legs extending across from each other. A few questions. Do I need to drill this chip? Should I terminate the legs? How would you guys do this repair? I attached a picture.
by jdn
October 25th, 2016, 7:37 am
Forum: Windshield Repair
Topic: Aftermarket windshields
Replies: 1
Views: 1185

Aftermarket windshields

Do aftermarket windshields chip easier than oem windshields?
by jdn
September 22nd, 2016, 10:03 am
Forum: Windshield Repair
Topic: Screw type vs spring type injector
Replies: 1
Views: 934

Screw type vs spring type injector

Screw type vs spring type injector. What's your preference? Screw type is all I've ever used and I'm happy with it.