Search found 3185 matches

by screenman
April 1st, 2020, 7:29 am
Forum: Windshield Repair
Topic: Magnetic reaction force.
Replies: 6
Views: 1033

Re: Magnetic reaction force.

They used to do glass nails for holding loose windshields in with, I think they stopped selling those when the specialist hammer needed was hard to get hold of.
by screenman
April 1st, 2020, 1:48 am
Forum: Windshield Repair
Topic: Magnetic reaction force.
Replies: 6
Views: 1033

Magnetic reaction force.

If you come across a tight starbreak try placing a magnet up close to it a another or a piece of metal on the other side of the glass, this helps create a ground force that draws the resin away from the atmosphere into the deepest parts of the legs.
by screenman
March 14th, 2020, 12:59 am
Forum: Business Development
Topic: Preferred vendor
Replies: 2
Views: 3226

Re: Preferred vendor

There are a lot of uninsured vehicles out there in fact over they make up the majority of vehicles on the road, so chase the bigger market would be my suggestion. I cannot help you with the preferred vendor bit as I am not in the USA.
by screenman
January 21st, 2020, 1:11 pm
Forum: Windshield Repair
Topic: Tent set up WIND
Replies: 3
Views: 3233

Re: Tent set up WIND

I used metal plates over the top of that flat bit on the bottom of the leg, then parked my car on top of it like you have. Only did a tent for a few weeks and found it very time consuming, fleets and dealers are a far better and reliable income 12 months of the year in my humble.
by screenman
January 19th, 2020, 2:37 am
Forum: Business Development
Topic: training
Replies: 1
Views: 2436

Re: training

Why would we? we have the best there is at Delta.
by screenman
September 26th, 2019, 12:31 am
Forum: Windshield Repair
Topic: Any suggestions- Drill?
Replies: 4
Views: 3656

Re: Any suggestions- Drill?

Same as Brent here in that I can only see the small photo, but something does look odd about it, maybe partially filled before. I would certainly not be drilling that type of repair as drilling down into the cone would not get you anywhere. Flexing and making sure I used a UV shield would be of utmo...
by screenman
September 18th, 2019, 10:09 pm
Forum: Windshield Repair
Topic: Rotary tool too big
Replies: 4
Views: 2279

Re: Rotary tool too big

The new Delta drill is brilliant, so nice to hold and use, plenty of power and long lasting charge, once again Delta have come up with the goods.
by screenman
September 9th, 2019, 10:03 pm
Forum: Windshield Repair
Topic: Star leg not filled
Replies: 5
Views: 4151

Re: Star leg not filled

That needed flexing from outside, not inside, heat is an enemy as it causes the glass to expand making to leg close up and not allowing resin to flow. Did you polish until the polish had dried as this is when the shine appears.

Never cure until the repair is full is something I teach over here.
by screenman
September 2nd, 2019, 10:05 pm
Forum: Windshield Repair
Topic: ONE YEAR
Replies: 1
Views: 2148

Re: ONE YEAR

I found adding long crack was counter productive, all it did was tell people not to bother having a small chip repaired until it became longer. I am very capable of doing long cracks and have taught many people over the years how to do them. Increasing sales in my humble is about getting away from a...
by screenman
August 30th, 2019, 3:40 am
Forum: Windshield Repair
Topic: Curing under pressure
Replies: 14
Views: 6598

Re: Curing under pressure

Glass Patch that is odd, I have never manged to get enough UV through the windshield even to set pit fill resin, reason being there is a built it uv inhibitor. Novus used to teach curing under pressure by resting the light on top of the injector at an angle, or at least they did when they trained me...