GT Glass Eliminator repair kit, how much is it worth

Got something to sell? Post it here!
Post Reply
DavidCook
Junior Member
Posts: 16
Joined: February 12th, 2013, 12:36 pm
Enter the middle number please (3): 3
Location: Overland Park KS
Has thanked: 25 times
Been thanked: 0
Contact:

GT Glass Eliminator repair kit, how much is it worth

Post by DavidCook » April 1st, 2013, 4:57 pm

We have a GT Glass Eliminator repair kit. It works good. What do you think it is worth if we sell it.
Image
Certifications:
Sika Urethane
Dow Chemical
Dinitrol
CRL Lawrence
Glasweld
Glass Technology
Liquid Resins
Glass Mechanix
OSHA 10

User avatar
Eco Steam
Member
Posts: 204
Joined: October 17th, 2006, 4:00 pm
Enter the middle number please (3): 5
Location: Austin, Texas
Has thanked: 0
Been thanked: 6 times
Contact:

Re: GT Glass Eliminator repair kit, how much is it worth

Post by Eco Steam » April 10th, 2013, 9:55 am

It would depend on the condition, how long you've had it, it's use, etc...without seeing it or anything like that, it's hard to determine a value if any. You also need to consider the fact that it's not even listed on GT's site any longer and has not been for sometime, I would say at least a year if not 2 or more. They probably still have/sell parts and such.

I started with a GT kit and still carry a couple of them, I wanted one of these for a while, but the cost was too much to justify the equipment. I now have my eyes set on a different, still expensive, system but will use my trade-in value towards it this year.

Good luck with figuring it out, it can be difficult believe me. I still have a vin etching kit from GT that is now 7 years old and it was used 1 time! it collects all my dust in the garage now. $799 plus shipping, I couldn't even get $100 for it, so I just decided to hold onto it, maybe put it to use when I open a shop in the future.
Eco Steam Car Wash & Detailing

DavidCook
Junior Member
Posts: 16
Joined: February 12th, 2013, 12:36 pm
Enter the middle number please (3): 3
Location: Overland Park KS
Has thanked: 25 times
Been thanked: 0
Contact:

Re: GT Glass Eliminator repair kit, how much is it worth

Post by DavidCook » April 11th, 2013, 1:04 pm

Thanks for the response. The conditions of it is it works perfect. GT stills sells all the parts. A company names VBSA is still selling them.
I agree these are very pricy at $4300 put based on a lot lower used price this one should be a lot more affordable.
Image
Certifications:
Sika Urethane
Dow Chemical
Dinitrol
CRL Lawrence
Glasweld
Glass Technology
Liquid Resins
Glass Mechanix
OSHA 10

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest