My very first restoration using ClearPro Inf 4.1

Discuss all aspects of headlight restoration, including marketing, technical, and business advice.
Post Reply
Manny
Junior Member
Posts: 2
Joined: July 20th, 2018, 10:20 pm
Enter the middle number please (3): 3
Has thanked: 0
Been thanked: 0

My very first restoration using ClearPro Inf 4.1

Post by Manny » August 4th, 2018, 7:24 pm

I prepped to protect the paint than I followed all the steps starting with the 320 grit all the way to the 3000. The outcome was pretty amazing even though one of the headlamps had interior damage. For the Techs that have been doing this for a while, what do you recommend to do with those hard to reach corners? In this partiular headlight, it has the upper part with a square shape making it hard to sand. Any help will be greatly appreciated, Thanks... One last thing it took me almost one hour from start to finish, I'm wondering if that is too long?

User avatar
Roo
Member
Posts: 200
Joined: February 13th, 2008, 10:32 pm
Enter the middle number please (3): 5
Location: Thornton, CO
Has thanked: 0
Been thanked: 1 time
Contact:

Re: My very first restoration using ClearPro Inf 4.1

Post by Roo » August 31st, 2018, 7:37 pm

Can you tell me the year, make, model of the vehicle? I have been doing this awhile (7-8 years) and I find myself coming in right at 90 min for most vehicles, but i am counting from the time i pull up at customers home/work until i drive away. I will also add that I am very very picky about my work:)

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests