My first dry sanding HLR
-
- Member
- Posts: 232
- Joined: May 20th, 2012, 1:05 pm
- Enter the middle number please (3): 3
- Location: South Elgin, IL
- Contact:
Re: My first dry sanding HLR
I use water when its warm out and turn to 99.8% alcohol to do the final cleaning after the compound during the winter months. If theres any moisture on the lens when you apply the 4.1, the lens will turn white as it cures.
Paul Weinstein
- pommy
- Member
- Posts: 258
- Joined: August 24th, 2011, 11:20 pm
- Enter the middle number please (3): 3
- Contact:
Re: My first dry sanding HLR
And his method was...Old Blue 66 wrote:I use water when its warm out and turn to 99.8% alcohol to do the final cleaning after the compound during the winter months. If theres any moisture on the lens when you apply the 4.1, the lens will turn white as it cures.
"My steps were 320, 500, 800, 1200, 1500 and 3000".
Spot the difference? That's why it's not clear
Ho Ho Ho!!
If the job doesn't mean more than the pay, it will never pay more.
-
- Member
- Posts: 232
- Joined: May 20th, 2012, 1:05 pm
- Enter the middle number please (3): 3
- Location: South Elgin, IL
- Contact:
- pommy
- Member
- Posts: 258
- Joined: August 24th, 2011, 11:20 pm
- Enter the middle number please (3): 3
- Contact:
Re: My first dry sanding HLR
Bluuuue...BlakRam wrote:So after my first attempt, I will need to redo them. They look good as far as all the old coating cleaning up, but they still have a little haze to them...not crystal clear. Without seeing pictures, where do you think I messed up and what step do I need to go back to? My steps were 320, 500, 800, 1200, 1500 and 3000.
If the job doesn't mean more than the pay, it will never pay more.
-
- Junior Member
- Posts: 9
- Joined: August 31st, 2013, 12:12 pm
- Enter the middle number please (3): 3
- Location: St Louis, MO
- Contact:
Re: My first dry sanding HLR
Pommy...you are about as clear as my headlights
- pommy
- Member
- Posts: 258
- Joined: August 24th, 2011, 11:20 pm
- Enter the middle number please (3): 3
- Contact:
Re: My first dry sanding HLR
Ha ha
Ok - you said your lenses were not crystal clear, right?
Blue replied, and in his reply, he said AFTER the COMPOUND stage.
You didn't use one in your sequence. That's why they were cloudy.
You can polish then until you retire with a 3000 pad, it will never be crystal.
Clear? Ha ha ))))
Ok - you said your lenses were not crystal clear, right?
Blue replied, and in his reply, he said AFTER the COMPOUND stage.
You didn't use one in your sequence. That's why they were cloudy.
You can polish then until you retire with a 3000 pad, it will never be crystal.
Clear? Ha ha ))))
If the job doesn't mean more than the pay, it will never pay more.
-
- Member
- Posts: 232
- Joined: May 20th, 2012, 1:05 pm
- Enter the middle number please (3): 3
- Location: South Elgin, IL
- Contact:
Re: My first dry sanding HLR
Still not sure what Pommy is talking about but if I take a stab at it, Ill guess that hes suggesting the use of a compound after the 3000 stage. IMO, thats a must.
Paul Weinstein
-
- Senior Member
- Posts: 1058
- Joined: April 12th, 2008, 8:47 pm
- Enter the middle number please (3): 5
- Location: U.S.
- Contact:
Re: My first dry sanding HLR
That's what's so nice about this process....there are several ways to achieve your goal!!Old Blue 66 wrote:Still not sure what Pommy is talking about but if I take a stab at it, Ill guess that hes suggesting the use of a compound after the 3000 stage. IMO, thats a must.
I haven't used a compound or polish in five years and my results are also crystal clear!!
To each his own......!
- pommy
- Member
- Posts: 258
- Joined: August 24th, 2011, 11:20 pm
- Enter the middle number please (3): 3
- Contact:
Re: My first dry sanding HLR
Hi t4k!
Hope you're doing well
What's your sequence then?
It's been so long! PM if you don't want to go public.
@paul - yep, that's what I was saying my friend
Hope you're doing well
What's your sequence then?
It's been so long! PM if you don't want to go public.
@paul - yep, that's what I was saying my friend
If the job doesn't mean more than the pay, it will never pay more.
-
- Senior Member
- Posts: 742
- Joined: June 16th, 2009, 11:28 pm
- Enter the middle number please (3): 3
- Location: NC
- Contact:
Re: My first dry sanding HLR
Merry Christmas to all !! BlakeRam, Pommy has his own method of doing HLR. I use the same method at times. The sequence of pads you listed are recommended, and it does a great job. However there are times you will have HLs that require something more. Pommy's method works. It shortens the sanding when doing hard-to-do lenses and doesnt require as many pads. You will learn little techniques the more you do HLRs that will reduce your time factor and can save you money. Wishing all of you a Happy & Productive New Year. Candyman
Who is online
Users browsing this forum: No registered users and 30 guests