Plastic V.S. Metal
-
- Junior Member
- Posts: 15
- Joined: August 7th, 2004, 10:45 am
- Enter the middle number please (3): 5
- Location: Tacoma, WA
- Contact:
Full Time
Just thought I'd inquire about people's opinions on plastic injectors and bridges v.s. metal injectors and bridges. I have heard quite a bit of religion on how plastic injectors work just as well even though they don't look as cool and that if a plastic bridge falls off the glass your not as likely to damage the car and/or bridge and injector. Also, I saw a guy throw his plastic bridge across a parking lot with the injector, pick it up, do a repair and say "Try that with a metal bridge and injector."
-
- Moderator
- Posts: 1194
- Joined: August 9th, 2003, 4:00 am
- Enter the middle number please (3): 5
- Location: Eugene OR
- Contact:
Plastic V.S. Metal
You forgot to add ours!
Bridges: plastic vs. metal vs. nylon/fiberglass
Bridges: plastic vs. metal vs. nylon/fiberglass
Delta Kits, Inc.
-
- Senior Member
- Posts: 1951
- Joined: November 12th, 2003, 6:11 pm
- Enter the middle number please (3): 5
- Location: Southern California
Although I own several metal I havnt used them in months i have been using
my Liquid resins injectors exclusivly the plastic seems durable and doesnt get hot in the sun. I find im using half as much resin and never have the wasted run down the windshield resin when i remove it. Also the design saves whatever resin wasnt used in the injector for the next repair 8)
my Liquid resins injectors exclusivly the plastic seems durable and doesnt get hot in the sun. I find im using half as much resin and never have the wasted run down the windshield resin when i remove it. Also the design saves whatever resin wasnt used in the injector for the next repair 8)
-
- Junior Member
- Posts: 15
- Joined: August 7th, 2004, 10:45 am
- Enter the middle number please (3): 5
- Location: Tacoma, WA
- Contact:
-
- Moderator
- Posts: 1194
- Joined: August 9th, 2003, 4:00 am
- Enter the middle number please (3): 5
- Location: Eugene OR
- Contact:
UV protection
Jive,
I was just meaning that our bridges aren't plastic and aren't metal, they're a nylon/fiberglass mixture...
There was humor behind it, I just didn't want to be left out!
I was just meaning that our bridges aren't plastic and aren't metal, they're a nylon/fiberglass mixture...
There was humor behind it, I just didn't want to be left out!
Delta Kits, Inc.
Who is online
Users browsing this forum: No registered users and 52 guests