Hi ya'll, Started practicing with my new(about 1 year old, but like new)Delta kits System. Took a while to figure out why resin leaked out by the seal. However I can not get resin to flow into the star chip, I tried drilling one and that did not help. I left injector for 25 min. and nothing. When I backed off the injector the resin ran out. What am I doing wrong?
The manual and the sales tape doesn't cover this anywhere and I did not find a post on it so maybe I am the only one with this problem.
THanks.........mr. P
can\'t fill chip
can't fill chip
Hard to fix your problem on the forum. If I were you I would call Delta. From what I understand they will provide you with support even if you have bought one of their systems used.
www.ohnonotagain.com
www.ohnonotagain.com
Re: can't fill chip
Mr. P,
Mafsu is right, it is very difficult to fix problems through the forum.
Like I said in a previous post, even though you bought your kit used, we will certainly offer you technical support, all you have to do is give us a call at 888.811.3451.
Jeff Higgins
Delta Kits, Inc.
[email]"jhiggins@deltakits.com"[/email]
www.deltakits.comEdited by: deltakits
at: 8/2/03 10:24 pm
Mafsu is right, it is very difficult to fix problems through the forum.
Like I said in a previous post, even though you bought your kit used, we will certainly offer you technical support, all you have to do is give us a call at 888.811.3451.
Jeff Higgins
Delta Kits, Inc.
[email]"jhiggins@deltakits.com"[/email]
www.deltakits.comEdited by: deltakits
![Image](http://www.deltakits.com/graphics/dki.jpg)
Who is online
Users browsing this forum: No registered users and 52 guests