Curing bullseyes under pressure.

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
User avatar
Mr Bill
Senior Member
Posts: 523
Joined: February 9th, 2005, 6:15 pm
Enter the middle number please (3): 5
Location: Santa Cruz CA
Contact:

Re: Curing bullseyes under pressure.

Post by Mr Bill »

Lots of arguments on this forum.
I am reminded of the "Argument Clinic" by Monty python.
https://www.youtube.com/watch?v=kQFKtI6gn9Y
User avatar
Brent Deines
Moderator
Posts: 2449
Joined: September 24th, 2003, 7:54 am
Enter the middle number please (3): 5
Location: Eugene, OR
Contact:

Re: Curing bullseyes under pressure.

Post by Brent Deines »

That is absolutely hilarious! Big fan of Monty Python but had not seen that one before. Always good to start the day with a good laugh lest we start taking ourselves too seriously.
Brent Deines
Delta Kits, Inc.
Image
screenman
Senior Member
Posts: 3192
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Contact:

Re: Curing bullseyes under pressure.

Post by screenman »

clearquest wrote:Screenman, you forgot to shake it!
Just tried that and it still stayed in.
GlassStarz
Senior Member
Posts: 1951
Joined: November 12th, 2003, 6:11 pm
Enter the middle number please (3): 5
Location: Southern California

Re: Curing bullseyes under pressure.

Post by GlassStarz »

Of course just pressure is often why you get a daisy as well. It has to go somewhere and the pv later is what will give. Too much pressure and no vac are the most common causes of the dreaded daisy. Not Really related to the original post but check this one went everywhere.
bill lambeth
Senior Member
Posts: 565
Joined: September 17th, 2007, 4:29 pm
Contact:

Re: Curing bullseyes under pressure.

Post by bill lambeth »

I agreeeeee ! Vac! Vac ! and more Vac !!!!! Then just a little wicking !
screenman
Senior Member
Posts: 3192
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Contact:

Re: Curing bullseyes under pressure.

Post by screenman »

I disagree, no vac vac vac needed, I have sold Delta to many ex GW guys, I wonder why that is.
clearquest
Member
Posts: 267
Joined: April 14th, 2010, 3:17 pm
Enter the middle number please (3): 3
Contact:

Re: Curing bullseyes under pressure.

Post by clearquest »

I disagree as well. I can do a completely filled bullseye with no vacuum. And no daisy ring.
screenman
Senior Member
Posts: 3192
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Contact:

Re: Curing bullseyes under pressure.

Post by screenman »

Sorry 14u, but you could not be more wrong with the video you have chose, this is a surface break, think about it, surface, open to the atmosphere, draw a vacuum there and we will all stop breathing.

I used to think vacuum was the way and only way, and then I realized that there was a better way.
clearquest
Member
Posts: 267
Joined: April 14th, 2010, 3:17 pm
Enter the middle number please (3): 3
Contact:

Re: Curing bullseyes under pressure.

Post by clearquest »

Why would you try to justify your post with a video of an unrelated type of damage? Very strange indeed.
screenman
Senior Member
Posts: 3192
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Contact:

Re: Curing bullseyes under pressure.

Post by screenman »

To me it showed an ignorance of the subject.
Post Reply

Who is online

Users browsing this forum: No registered users and 45 guests