Page 3 of 4

Re: Which kit to start with?

Posted: December 2nd, 2016, 9:46 am
by screenman
I use a Delta system and very little resin, about .2 of a gram on each repair giving me 75 repairs per bottle, other systems I have tried and tested use much the same or sometimes more. I am yet to find a system that uses less.

Re: Which kit to start with?

Posted: December 2nd, 2016, 4:36 pm
by Dave M
I reported in a past post (maybe 8 yrs. ago) that I was getting 110 repairs from a 1/2 ounce bottle.

Re: Which kit to start with?

Posted: December 2nd, 2016, 4:37 pm
by Dave M
I think we've gone above and beyond what this original post was about!

Re: Which kit to start with?

Posted: December 2nd, 2016, 7:38 pm
by sunshine wr
There ain't nothin' that'll get these guys more riled up than a vacuum thread.

Re: Which kit to start with?

Posted: December 3rd, 2016, 12:42 am
by screenman
Just stating facts.

Re: Which kit to start with?

Posted: December 3rd, 2016, 5:02 am
by sunshine wr
screenman wrote:Just stating facts.
Me too.

Re: Which kit to start with?

Posted: December 3rd, 2016, 3:03 pm
by ternaP
I just found this site, didn't realize it was by delta. I use a machine for repairs and it out weighs a bridge system hands down.

Re: Which kit to start with?

Posted: December 3rd, 2016, 4:07 pm
by Dave M
So which system are you using? Are we suppose to guess?!

Re: Which kit to start with?

Posted: December 3rd, 2016, 7:26 pm
by Dave M
I also used a machine that out weighed all injectors.....worked great but had to stop using it because it's 15 lb. weight was damaging my shoulder from carrying it around from one repair to another!

Re: Which kit to start with?

Posted: December 4th, 2016, 9:58 am
by sunshine wr
Machines don't allow tech interaction with breaks. Some repairs require manipulation to fill properly, not just vacuum and pressure cycles!