Drilling with resin on the glass, ruin bits?

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
Post Reply
impala-renegade
Junior Member
Posts: 38
Joined: July 8th, 2013, 7:13 pm
Enter the middle number please (3): 3
Has thanked: 2 times
Been thanked: 2 times

Drilling with resin on the glass, ruin bits?

Post by impala-renegade » July 14th, 2013, 9:19 pm

Seems like if I try to drill or re-drill a hole with resin on the glass, my bit doesn't want to work!! IDK if it's ruining them or it's just hard to drill in that circumstance.

screenman
Senior Member
Posts: 3149
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Has thanked: 59 times
Been thanked: 115 times

Re: Drilling with resin on the glass, ruin bits?

Post by screenman » July 14th, 2013, 10:09 pm

Resin is an excellent lubricant, you can get a new bur to work but a worn one will just not do the job very well. Learning read the break correctly will lesson the amount of times you need to drill into a damage, a quality magnifying glass is useful for this. I had a guy on the phone the other day who taught to drill bulls eye break, the person who showed him that was not well skilled themselves and had no understanding of the break.

J.T.Window
Member
Posts: 159
Joined: September 20th, 2004, 6:56 pm
Enter the middle number please (3): 5
Location: CA
Has thanked: 0
Been thanked: 4 times

Re: Drilling with resin on the glass, ruin bits?

Post by J.T.Window » July 17th, 2013, 8:25 am

Impala -- you are packing cured resin into the gaps between the 6 little blades on your burs. If you heat the tip just right with a lighter or torch, the old resin will burn and can be wiped or brushed away - giving you some more use out of the bur.
Doesn't sound like it will work, does it? Worth a try?
These users thanked the author J.T.Window for the post (total 2):
Brent Deines (July 17th, 2013, 5:28 pm) • Jordan Deines (August 28th, 2013, 4:27 pm)
Rating: 50%

screenman
Senior Member
Posts: 3149
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Has thanked: 59 times
Been thanked: 115 times

Re: Drilling with resin on the glass, ruin bits?

Post by screenman » July 17th, 2013, 10:21 am

I have and it does indeed work, however drilling into a wet repairs is never as easy as a dry one. I would say if you need to drill halfway through a repair then you missed something in the inspection stage, this is where for some a magnifying glass works.

Mariagilbert
Junior Member
Posts: 25
Joined: May 14th, 2013, 2:55 am
Enter the middle number please (3): 3
Location: 28 AUTO CENTER DRIVE, TUSTIN, CA 92782
Has thanked: 3 times
Been thanked: 0
Contact:

Re: Drilling with resin on the glass, ruin bits?

Post by Mariagilbert » July 20th, 2013, 2:58 am

Which diamond drill bits to prefer the most ? :?:

harryrat
Junior Member
Posts: 5
Joined: August 27th, 2013, 6:51 pm
Enter the middle number please (3): 3
Has thanked: 0
Been thanked: 1 time

Re: Drilling with resin on the glass, ruin bits?

Post by harryrat » August 28th, 2013, 12:07 am

I like the fg701 carbide burr

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest