When I first started many years ago, here is how I would add my resin. I would turn the injector over (upside down) and with the knob turned in all the way I would add one to two drops of resin. Then back turn the knob and let it draw the resin back into the injector and repeat this until I had enough resin then attach the injector to the windshield and proceed as normal. Does anyone else do this? Just would like to know how everyone else does it.
Thanks,
adding resein ????
-
- Junior Member
- Posts: 38
- Joined: April 6th, 2014, 4:55 pm
- Enter the middle number please (3): 3
- Contact:
- Mr Bill
- Senior Member
- Posts: 523
- Joined: February 9th, 2005, 6:15 pm
- Enter the middle number please (3): 5
- Location: Santa Cruz CA
- Contact:
Re: adding resein ????
Depends on what kind of injector you are using.
Are you using a DK injector?
DK recommends using an eye dropper once the injector has been mounted on the windshield.
This method works for practically everyone else who uses a DK injector.
(You asked a very similar question last week about loading resin into the injector after your eyedropper cured and you were no longer able to use it.)
Are you using a DK injector?
DK recommends using an eye dropper once the injector has been mounted on the windshield.
This method works for practically everyone else who uses a DK injector.
(You asked a very similar question last week about loading resin into the injector after your eyedropper cured and you were no longer able to use it.)
-
- Senior Member
- Posts: 565
- Joined: September 17th, 2007, 4:29 pm
- Contact:
Re: adding resein ????
h2 try the syringes ! Korey can give you a video on loading them ! Eye dropper thing just didn't work for me. You have be to careful and I know screen you never had one cure up on you!
Who is online
Users browsing this forum: Google [Bot] and 18 guests