Liquid Resins Resonator QT with 15 seals

Got something to sell? Post it here!
Post Reply
impala-renegade
Junior Member
Posts: 38
Joined: July 8th, 2013, 7:13 pm
Enter the middle number please (3): 3
Contact:

Liquid Resins Resonator QT with 15 seals

Post by impala-renegade »

This is the bridge and injector from one of the top windshield repair companies in the business for the last 20 years, right up to today. Liquid Resins will help you with everything you need, with any questions you have, advice, supplies etc.. and is still selling this bridge/injector with great popularity.

"With the Resinator Quad Thread
the technician can tackle many repairs that with other systems would have
to be turned away (therefore costing YOU money). The Resinator Q.T. can be
used very easily on vertical glass WITHOUT resin leaking backwards out of
the injector.

The R.Q.T saves money because
resin can be stored in the injector for virtually an infinite amount of
time between repairs.

The R.Q.T. is resin friendly and
is made of materials that are specifically designed to be exposed for
extended periods of time to the chemicals used in windshield repair
resins. Our injector is made from a space-aged polypropylene with an ultra
violet inhibitor. This means that the injector will not allow the resin to
cure inside the equipment, which with our competitors would in most cases
ruin the injector. The o-ring seals in the R.Q.T. are also made of a
proprietary space-age material that does not allow the resin to
deteriorate the o-ring and cause it to fail prematurely as with many other
systems out there.

The R.Q.T. is also VERY low maintenance. Since the R.Q.T. is made from materials
that can't be damaged by resin curing prematurely. Most other systems require that the
injector be cleaned daily if not everytime it's used."


They are really helpful! I know some people on the forum prefer this system so it's a safe bet if you'd just like to try it out or buy it because you know you'll love it.

It's in good used condition.
PRICE IS $85,
Thanks ~

Charlie
Attachments
IMAG0249.jpg
IMAG0249.jpg (160.95 KiB) Viewed 621 times
IMAG0250.jpg
IMAG0250.jpg (162.5 KiB) Viewed 621 times
screenman
Senior Member
Posts: 3192
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Contact:

Re: Liquid Resins Resonator QT with 15 seals

Post by screenman »

Have you tried advertising it on the LR forum?
impala-renegade
Junior Member
Posts: 38
Joined: July 8th, 2013, 7:13 pm
Enter the middle number please (3): 3
Contact:

Re: Liquid Resins Resonator QT with 15 seals

Post by impala-renegade »

No, I didn't know they had one ~ Thanks.
bill lambeth
Senior Member
Posts: 565
Joined: September 17th, 2007, 4:29 pm
Contact:

Re: Liquid Resins Resonator QT with 15 seals

Post by bill lambeth »

Screen was being a smart #%#%$!!!!
bill lambeth
Senior Member
Posts: 565
Joined: September 17th, 2007, 4:29 pm
Contact:

Re: Liquid Resins Resonator QT with 15 seals

Post by bill lambeth »

But this is a great injector ! I used it for about 8 years till I got smart and went to the EcoVac produced by GW ! The EcoVac is no doubt the best injector out there !!!
screenman
Senior Member
Posts: 3192
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Contact:

Re: Liquid Resins Resonator QT with 15 seals

Post by screenman »

Just showing that not all manufacturers are putting the same effort into the business as Delta does. Bill your thoughts are completely different to mine on equipment so I will not go there, enough said that I have used the blue plastic multi seal inject shown along with the Eco Vac and I still prefer my Delta tools.
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests