Which kit to start with?

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
screenman
Senior Member
Posts: 3192
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Contact:

Re: Which kit to start with?

Post by screenman »

I use a Delta system and very little resin, about .2 of a gram on each repair giving me 75 repairs per bottle, other systems I have tried and tested use much the same or sometimes more. I am yet to find a system that uses less.
Dave M
Senior Member
Posts: 648
Joined: August 9th, 2003, 6:13 am
Enter the middle number please (3): 5
Location: Westbrook, ME
Contact:

Re: Which kit to start with?

Post by Dave M »

I reported in a past post (maybe 8 yrs. ago) that I was getting 110 repairs from a 1/2 ounce bottle.
Dave M
Senior Member
Posts: 648
Joined: August 9th, 2003, 6:13 am
Enter the middle number please (3): 5
Location: Westbrook, ME
Contact:

Re: Which kit to start with?

Post by Dave M »

I think we've gone above and beyond what this original post was about!
sunshine wr
Senior Member
Posts: 626
Joined: August 13th, 2003, 5:53 am
Contact:

Re: Which kit to start with?

Post by sunshine wr »

There ain't nothin' that'll get these guys more riled up than a vacuum thread.
screenman
Senior Member
Posts: 3192
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Contact:

Re: Which kit to start with?

Post by screenman »

Just stating facts.
sunshine wr
Senior Member
Posts: 626
Joined: August 13th, 2003, 5:53 am
Contact:

Re: Which kit to start with?

Post by sunshine wr »

screenman wrote:Just stating facts.
Me too.
ternaP
Junior Member
Posts: 10
Joined: November 29th, 2016, 7:13 am
Enter the middle number please (3): 3
Contact:

Re: Which kit to start with?

Post by ternaP »

I just found this site, didn't realize it was by delta. I use a machine for repairs and it out weighs a bridge system hands down.
Dave M
Senior Member
Posts: 648
Joined: August 9th, 2003, 6:13 am
Enter the middle number please (3): 5
Location: Westbrook, ME
Contact:

Re: Which kit to start with?

Post by Dave M »

So which system are you using? Are we suppose to guess?!
Dave M
Senior Member
Posts: 648
Joined: August 9th, 2003, 6:13 am
Enter the middle number please (3): 5
Location: Westbrook, ME
Contact:

Re: Which kit to start with?

Post by Dave M »

I also used a machine that out weighed all injectors.....worked great but had to stop using it because it's 15 lb. weight was damaging my shoulder from carrying it around from one repair to another!
sunshine wr
Senior Member
Posts: 626
Joined: August 13th, 2003, 5:53 am
Contact:

Re: Which kit to start with?

Post by sunshine wr »

Machines don't allow tech interaction with breaks. Some repairs require manipulation to fill properly, not just vacuum and pressure cycles!
Post Reply

Who is online

Users browsing this forum: No registered users and 33 guests