Difficult Vehicle
-
- Junior Member
- Posts: 75
- Joined: November 24th, 2018, 7:52 pm
- Enter the middle number please (3): 3
- Location: NM and TX
- Contact:
Difficult Vehicle
I have a customer that has a lifted F350 that has a chip dead center and about three inches from the top. How would you address this challenge? Ladder? Scaffold? I don’t want to have to sit on his hood.
Semper Fi - USMC
Don’t give up! Don’t ever give up!
Jimmy V.
Don’t give up! Don’t ever give up!
Jimmy V.
-
- Member
- Posts: 142
- Joined: November 23rd, 2009, 1:16 pm
- Enter the middle number please (3): 3
- Contact:
Re: Difficult Vehicle
I hate it when that happens. But if I cannot reasonably reach it for a repair, I would have to refrain from the job. Its all to easy to create more damage either to the vehicle or my back.
-
- Senior Member
- Posts: 3192
- Joined: February 25th, 2004, 1:44 pm
- Enter the middle number please (3): 5
- Location: uk Lincolnshire
- Contact:
Re: Difficult Vehicle
I just get lowered in by helicopter, I though all you guys over there had one. That said, I will try and reach it but I am sure not going to take the chance on causing damage, most of my fleet customers will have some form of scaffolding.
-
- Junior Member
- Posts: 75
- Joined: November 24th, 2018, 7:52 pm
- Enter the middle number please (3): 3
- Location: NM and TX
- Contact:
Re: Difficult Vehicle
Do you all use a ladder or step stool and if so do you wrap it so it won’t scratch the customers vehicle?
Screenman, I don’t know how much you pay for your helicopter but here in the US there around $350 an hour.
Screenman, I don’t know how much you pay for your helicopter but here in the US there around $350 an hour.
Semper Fi - USMC
Don’t give up! Don’t ever give up!
Jimmy V.
Don’t give up! Don’t ever give up!
Jimmy V.
-
- Senior Member
- Posts: 648
- Joined: August 9th, 2003, 6:13 am
- Enter the middle number please (3): 5
- Location: Westbrook, ME
- Contact:
Re: Difficult Vehicle
Have you tried opening the door nearest the break and standing on the floor board? If you can reach the break cover the door frame with towel or blanket.
-
- Junior Member
- Posts: 75
- Joined: November 24th, 2018, 7:52 pm
- Enter the middle number please (3): 3
- Location: NM and TX
- Contact:
Re: Difficult Vehicle
Dave, thanks, I will give that a try.
Semper Fi - USMC
Don’t give up! Don’t ever give up!
Jimmy V.
Don’t give up! Don’t ever give up!
Jimmy V.
-
- Senior Member
- Posts: 3192
- Joined: February 25th, 2004, 1:44 pm
- Enter the middle number please (3): 5
- Location: uk Lincolnshire
- Contact:
Re: Difficult Vehicle
Never be afraid to say no to a job, there are a lot more out there.
-
- Junior Member
- Posts: 75
- Joined: November 24th, 2018, 7:52 pm
- Enter the middle number please (3): 3
- Location: NM and TX
- Contact:
Re: Difficult Vehicle
Good advice screenman thanks
Semper Fi - USMC
Don’t give up! Don’t ever give up!
Jimmy V.
Don’t give up! Don’t ever give up!
Jimmy V.
-
- Member
- Posts: 154
- Joined: July 20th, 2018, 3:18 pm
- Enter the middle number please (3): 3
- Contact:
Re: Difficult Vehicle
Step Stool is mandatory for this business I am 6ft 1 and have to reach at times even with step stool. Semi Trucks are rough have to open hood and stand on tire and stretch. My wife is shorter she struggles with big trucks but step stool is a few bucks at Fred Meyer they also carry some sweet bungee cords if you do a tent in multiple colors. They have these small bungees also that come in like a six pack work extremely well in the middle of big banners keeps the banners straight and professional. Maybe someone else here can chime in on the best way to do semi trucks when the chip is in the middle of the windshield up high? Huge trucking industry here being I am close to the border.
-
- Junior Member
- Posts: 8
- Joined: December 6th, 2018, 8:40 am
- Enter the middle number please (3): 3
- Contact:
Re: Difficult Vehicle
When I get my business up and running Im planning on getting one of these guys.
https://www.homedepot.com/p/Gorilla-Lad ... /302159317
I think that should get me covered for most repairs.
https://www.homedepot.com/p/Gorilla-Lad ... /302159317
I think that should get me covered for most repairs.
Who is online
Users browsing this forum: Majestic-12 [Bot] and 14 guests