UV protection

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
Fasbreak
Junior Member
Posts: 28
Joined: May 18th, 2004, 11:42 am
Enter the middle number please (3): 5
Location: Wisconsin

Post by Fasbreak »

I personally use glass mechanix GM 194 - UV Bubble Shield
Code: GM194
Price: $80.00
Its a perfect tool.
:D
Almost-New Too

Post by Almost-New Too »

to everyone who posted for my question. I'm researching the results now.
autocosmetics
Member
Posts: 101
Joined: August 29th, 2003, 2:42 am
Enter the middle number please (3): 5
Location: North Canton, Ohio
Contact:

Post by autocosmetics »

Glass Medic also sells a sun and rain dome for $65.00, looks like the one from Glass Mechanix.
scratchy

Post by scratchy »

A couple of weeks ago I bought an EZ-UP Dome II for $99. It is specifically designed to work better in breezy conditions. I put it off for too long because I thought it would be a hassle putting it up by myself. I should have bought this thing in my first 2 months of service, it is that good! It cuts down on heat and UV though I still cover the work with shop towels. The quality of multiple repairs has gone up and the customers like seeing the red carpet treatment. I pull it out to do long cracks and multiple chips. For the easy single chip I will just go with the golf umbrella and shop towels for the sake of time. I always carry it with me and don't sweat the possibility of rain while doing a job. This retail store no brainer ranks up there with the 110 volt 24 inch black light wally world sells!
Mikedoby
Junior Member
Posts: 68
Joined: May 13th, 2004, 2:01 pm
Enter the middle number please (3): 5
Location: Albemarle, North Carolina

Delta on the road

Post by Mikedoby »

I also use the Glass Mechanix UV Bubble and find that I works grate most of the time. I not only use it on the windshield to cover up the area while I am working, but use it to cover up my bridge after I have completed the work on the windshield to prevent the resin from curing in my injector bridge until I can get it cleaned up.
jonnyques
Member
Posts: 182
Joined: October 31st, 2003, 1:00 pm

break out/ a/c

Post by jonnyques »

Gold Star you said you got a clear one from Liquid Resin? They only show the amber one on the web. Did you have to request it clear?
thanks
gold star wsr
Member
Posts: 286
Joined: August 12th, 2003, 12:00 pm

newbie

Post by gold star wsr »

Until fairly recently, LR did offer both the clear as well as the amber screens, but they were offering only the amber when I called them. However, they were still able to supply the clear one at the time I requested it. You may still be able to get one, but yes, you do have to ask.
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests