This windshield repair forum will be used for the benefit of windshield repair technicians, regardless of their equipment manufacturer.
https://www.windshield-repair-forum.com/
https://www.windshield-repair-forum.com/viewtopic.php?t=3007
AGSS, with the Glass Mechanix injector it is not to hard or complicated in keeping the resin from falling out. Once you have mastered the technique from letting this happen, you'll be all right.I was able to try a Glass Mechanix bridge and injector. It did a great repair, however That whole pre-load the injector and hope the resin doesn't fall out thing just seemed a little complicated.
If you're worried about the resin falling out prematurely, why not try the squeeze technique, you'll find that it works with great effect! :eusa_shifAGSS;22488 wrote:Hello all, I am still considering buying one of Delta's kits. Today I was able to try a Glass Mechanix bridge and injector. It did a great repair, however That whole pre-load the injector and hope the resin doesn't fall out thing just seemed a little complicated. Does Delta's injectors load this way? I understand the logic behind it, It really pulls a good vac, just complicated.
How does it work?Sikandar;22526 wrote:If you're worried about the resin falling out prematurely, why not try the squeeze technique, you'll find that it works with great effect! :eusa_shif
Sikandar;22526 wrote:If you're worried about the resin falling out prematurely, why not try the squeeze technique, you'll find that it works with great effect! :eusa_shif
