Page 2 of 2
Re: Suction Cups
Posted: July 29th, 2007, 8:11 pm
by mafsu
Take a look at these and see if they will work with your bridges. They are what I use on mine and Delta has used them on some of their bridges in the past. If not Anver may have something that will work for you.
http://www.anver.com/document/vacuum%20 ... olders.htm
Part 670.0
Re: Suction Cups
Posted: July 30th, 2007, 3:36 am
by alabat
Try Liquid Resins, they use a large suction cup on their unit.
http://www.liquidresins.com
Re: Suction Cups
Posted: July 30th, 2007, 5:21 am
by Layne
Thanks Alabat. I have visited the LR site....I think that their cup matches the one that I need. I have e-mailed them inquiring about their cup.
Thanks everyone for your input.
Layne
Re: Suction Cups
Posted: July 30th, 2007, 5:57 am
by cazador
We are all trying hard to make each others life more pleasant by helping eachother to find the desirables for our trade as much as possible.
Lets keep it up !
Thanks, Ed.
Re: Suction Cups
Posted: July 30th, 2007, 3:58 pm
by Layne
I would have thought that LR would respond to my e-mail regarding suction cups----but so far it has been ignored!
Re: Suction Cups
Posted: July 31st, 2007, 10:47 am
by Layne
Eureka!
I talked to Bill at Liquid Resins...it looks like they have the suction cup that fits my bridges. I have a couple on the way and if they fit, I will order new ones for all of my bridges, Thanks to Alabat (your info was right on) and to every one else for your helpful advice.
Layne