Glass Treatment/RainX
-
- Senior Member
- Posts: 3192
- Joined: February 25th, 2004, 1:44 pm
- Enter the middle number please (3): 5
- Location: uk Lincolnshire
Re: Glass Treatment/RainX
I am only stating what is says on the Rainx site, maybe its not silicone?
33,000 + screen repairs over 18 years and still learning.
Over
Over
Re: Glass Treatment/RainX
I read what it said for removing it. It doesn't say water alone.
Re: Glass Treatment/RainX
The reference it made was to RainX anti-fog. Different product used on the inside of the windshield.
-
- Senior Member
- Posts: 3192
- Joined: February 25th, 2004, 1:44 pm
- Enter the middle number please (3): 5
- Location: uk Lincolnshire
Re: Glass Treatment/RainX
On the line under that is says you can remove Rainx from wiper blades using windscreen washer fluid. Now this is something we do not have a problem getting out.
33,000 + screen repairs over 18 years and still learning.
Over
Over
Re: Glass Treatment/RainX
You da man! I'm glad RainX isn't a problem for you!
Speaking from my experience, it can be a stubborn problem.
And silicone also presents problems for body shops doing paint work
and furniture refinishers, as it is also a common ingredient in furniture polish.
Speaking from my experience, it can be a stubborn problem.
And silicone also presents problems for body shops doing paint work
and furniture refinishers, as it is also a common ingredient in furniture polish.
-
- Senior Member
- Posts: 3192
- Joined: February 25th, 2004, 1:44 pm
- Enter the middle number please (3): 5
- Location: uk Lincolnshire
Re: Glass Treatment/RainX
Tell me about it still do a bit of paint for one very loyal and high paying customer. Managed to get them to stop using silicone products in workshop. Its still in the air after 2 years and still produces fish eyes if we do not use a anti silicone agent in the paint mix.
33,000 + screen repairs over 18 years and still learning.
Over
Over
-
- Senior Member
- Posts: 3192
- Joined: February 25th, 2004, 1:44 pm
- Enter the middle number please (3): 5
- Location: uk Lincolnshire
Re: Glass Treatment/RainX
Splitpit I have just checked out your average rainfall per annum. If you live in the west of Kansas about 17 inches per year in the southeast 40 inches. I hope you live in the first one if not move. Best of luck mate good discussion, thanks.
33,000 + screen repairs over 18 years and still learning.
Over
Over
-
- Senior Member
- Posts: 1951
- Joined: November 12th, 2003, 6:11 pm
- Enter the middle number please (3): 5
- Location: Southern California
Re: Glass Treatment/RainX
Glass is porous the many dif products around all basicly fill the pores making the surface smooth some are polimers some silicone, alcohol on a paper towel will remove them a liittle splash on a chip that may have been coated over followed by a scribe or drill bit tip opens the break to allow you to repair it the cleaning is important so that the pit filler wil stick
Re: Glass Treatment/RainX
Grouselab,
If customer isn't sure if rain-x had been applied, just apply a small drop of resin on shield prior to repairing. If it beads up...there's a high probability rain-x was used!
Screenman,
Do you know what the anti-silicone agent use for painting is made up of? Be nice to try some out on a rain-x'd practice sheild.
If customer isn't sure if rain-x had been applied, just apply a small drop of resin on shield prior to repairing. If it beads up...there's a high probability rain-x was used!
Screenman,
Do you know what the anti-silicone agent use for painting is made up of? Be nice to try some out on a rain-x'd practice sheild.
Who is online
Users browsing this forum: No registered users and 30 guests