Page 3 of 3
Re: Tight Star Break
Posted: February 1st, 2007, 3:42 pm
by OmNi
If you don't drill at the end of the crack and stop it completely... could it continue to run later?
Re: Tight Star Break
Posted: February 1st, 2007, 3:47 pm
by wilz
The possibilities are very high
Re: Tight Star Break
Posted: February 1st, 2007, 4:01 pm
by wilz
Besides, i find it harder to fill the tip if you do not pop a mini bullseye.
Re: Tight Star Break
Posted: February 1st, 2007, 6:54 pm
by GlasWeldTech
I think the thread has taken a new turn somewhere and some have gotten confused. I think David does pop a bullseye at the end of a crack but he doesn't drill and pop all the legs coming out of a star break. I am sure David will be here soon.
Re: Tight Star Break
Posted: February 1st, 2007, 10:25 pm
by Coitster
Well when it comes to filling a long crack they absolutly I drill and pop a bullseye at the end of a crack to stop it. However on stars and little chips I almost never drill and pop. Only if I have to. I do however use a scribe and clean out all the damaged class. I push down a little bit and then put the inject on and pull a vaccum.
David
Coitster