Page 3 of 3
Hog out
Posted: March 16th, 2004, 3:18 pm
by MadMike
Thanks for the correction Jeff, I would assume the hogging out would be very slight, and not exaggerated either, correct?
Posted: March 16th, 2004, 3:23 pm
by Delta Kits
It's very slight...You want to keep the bur end of the drill steady, and rotate the back in a circular motion. As far as how much to rotate...If you think of the diameter of the circle the back makes...Make it about 1.5 times the width of the drill. Very small, anything more and you will make a larger hole than is necessary.
Posted: March 16th, 2004, 7:26 pm
by glassdoctor
Just be really nervous when you drill... your shaky hands will suffice for the wiggle motion needed. 8-[