New curing light.
-
- Senior Member
- Posts: 648
- Joined: August 9th, 2003, 6:13 am
- Enter the middle number please (3): 5
- Location: Westbrook, ME
Re: New curing light.
Regarding the rechargeable batteries, What is the differences I'm seeing between a 3.0v 750mPH and ones that have a higher mPH like 950, 1000, 1300 and higher? Some batteries are not interchangeable in the chargers!
-
- Senior Member
- Posts: 1058
- Joined: April 12th, 2008, 8:47 pm
- Enter the middle number please (3): 5
- Location: U.S.
Re: New curing light.
No idea. I purchased (6) 3.0 v 750mph, charged them and went to work. They work a treat!!Dave M wrote:Regarding the rechargeable batteries, What is the differences I'm seeing between a 3.0v 750mPH and ones that have a higher mPH like 950, 1000, 1300 and higher? Some batteries are not interchangeable in the chargers!
-
- Junior Member
- Posts: 19
- Joined: August 4th, 2011, 10:03 am
- Enter the middle number please (3): 3
Re: New curing light.
I believe the higher the end number the longer it will last between recharging
-
- Junior Member
- Posts: 19
- Joined: May 2nd, 2004, 7:47 pm
- Enter the middle number please (3): 5
- Location: Srilanka
- Contact:
Re: New curing light.
Members,
I have ordered one LED LAMP IGNITE from DETA KITS to be shipped to Sri Lanka. Want to try out same and reply the results to the forum.
Proud to inform the forum I am the only W/S repairer and Glass polisher in Sri Lanka. for last 20 years. Market leader with USA technology.
Sylvester.
S/L.
I have ordered one LED LAMP IGNITE from DETA KITS to be shipped to Sri Lanka. Want to try out same and reply the results to the forum.
Proud to inform the forum I am the only W/S repairer and Glass polisher in Sri Lanka. for last 20 years. Market leader with USA technology.
Sylvester.
S/L.
-
- Junior Member
- Posts: 42
- Joined: August 18th, 2008, 2:38 pm
- Enter the middle number please (3): 5
- Location: Inverness
Re: New curing light.
I read your intro Sylvester and followed the horrific murders on the news ....puts our lives into perspectiveSylvi wrote:Members,
I have ordered one LED LAMP IGNITE from DETA KITS to be shipped to Sri Lanka. Want to try out same and reply the results to the forum.
Proud to inform the forum I am the only W/S repairer and Glass polisher in Sri Lanka. for last 20 years. Market leader with USA technology.
Sylvester.
S/L.

- Chips_Away_Windshield_Repair
- Member
- Posts: 189
- Joined: February 10th, 2004, 1:08 pm
- Enter the middle number please (3): 5
- Location: Tomball Texas and surrounding areas
- Contact:
Re: New curing light.
Got it, luv it!
-
- Senior Member
- Posts: 3192
- Joined: February 25th, 2004, 1:44 pm
- Enter the middle number please (3): 5
- Location: uk Lincolnshire
Re: New curing light.
After 25 years of dragging a battery around with me for repairs this has totally changed my kit, that and my eventual conversion to a Dremel. Thanks Delta for helping an old man have a few less aches and pains at the end of a working day.
I know Frank questioned my reason behind this post, bust as many of you who have since purchased one found out they are a superb piece of kit. This is the reason I could not stay quiet on the subject.
Makes me chuckle sometimes this business, so little investment for such a good income. The latest piece of kit for less than one repair, brilliant.
I know Frank questioned my reason behind this post, bust as many of you who have since purchased one found out they are a superb piece of kit. This is the reason I could not stay quiet on the subject.
Makes me chuckle sometimes this business, so little investment for such a good income. The latest piece of kit for less than one repair, brilliant.
-
- Senior Member
- Posts: 565
- Joined: September 17th, 2007, 4:29 pm
Re: New curing light.
I agree with you this has totally change my kit.I am going to start using mine with the Scorpion holder because I dont like the holder that it comes with. I am going to ask Delta can the scorpion be shortened .
-
- Senior Member
- Posts: 3192
- Joined: February 25th, 2004, 1:44 pm
- Enter the middle number please (3): 5
- Location: uk Lincolnshire
Re: New curing light.
No problem, just warm it up slightly where you want to break it apart, take the section out an put it back together.
-
- Senior Member
- Posts: 565
- Joined: September 17th, 2007, 4:29 pm
Re: New curing light.
Thanks Graham ! Do you like the holder it came with?
Who is online
Users browsing this forum: No registered users and 31 guests