Page 7 of 14
Re: Headlight restoration?
Posted: July 13th, 2007, 10:33 am
by chips1144
Does anyone know if the sanding discs in Dvelops system can be used with Water?
Re: Headlight restoration?
Posted: July 13th, 2007, 10:37 am
by chips1144
Rightlooks system, people speak of using one step clear, is that the deep fill restorer, or the shine restorer protector?
This looks like a relabeled Bright solutions system.
Re: Headlight restoration?
Posted: July 13th, 2007, 2:26 pm
by AGSS
Shine restorer.
Re: Headlight restoration?
Posted: July 13th, 2007, 7:17 pm
by gt_repair
Yes you can us water with them, That would be the only way you would get a good job...
Don D.
Re: Headlight restoration?
Posted: July 19th, 2007, 9:03 pm
by toab
Field testing rightlooks product now on wifes car.Looks good so far.Done 4-mos ago.
Re: Headlight restoration?
Posted: July 30th, 2007, 6:15 pm
by GTECH
Hi,
Look at IPS system
Re: Headlight restoration?
Posted: July 30th, 2007, 6:32 pm
by GTECH
Hi Jared,
This add on can be very profitable , there are some learning curves., it is not a 10-15 min job, in and out ,with headlights you have to have patience, to do a set the correct way will take about an hour,once you get the learning curve down, you can also get out scratches/gouges and do pitted headlights as well, they will cost more to do and will pay off, if you need more help, let me know.
Re: Headlight restoration?
Posted: July 30th, 2007, 6:37 pm
by GTECH
This add on can be very profitable , there are some learning curves., it is not a 10-15 min job, in and out ,with headlights you have to have patience, to do a set the correct way will take about an hour,once you get the learning curve down, you can also get out scratches/gouges and do pitted headlights as well, they will cost more to do and will pay off, if you need more help, let me know.
Re: Headlight restoration?
Posted: August 6th, 2007, 8:03 pm
by Chips-B-Gone
Hello all, I have been out of the business for a couple of years but I am making a comeback and I am seriously considering adding Headlight Restoration. I could not believe the number of autos out there with substandard headlights. Right now I am scoping out my competition, which doesn't seem to be much. I have checked the local classifieds and the NEW yellow pages that was delivered yesterday... So far so good on competition.
Just my 2 cents:)
Re: Headlight restoration?
Posted: August 13th, 2007, 4:54 pm
by Chips-B-Gone
chips1144;25008 wrote:Does anyone know if the sanding discs in Dvelops system can be used with Water?
After talking today with Mimi at Dvelup I believe you can. I have watched the demo online and followed a couple of different threads on the same subject and I am SOLD on Dvelup's system. I will order one on Wednesday and try it out on one headlight on my '01 Explorer. I guess you could consider it a "half and half SUV" just like MAACO used to have.