Page 1 of 1

Posted: July 19th, 2004, 8:42 pm
by Mikedoby
I remember one of you guys some time back talking about a coupling that fits into your 2" trailor hitch receiver that attached to a large unbrella. I would appreciate additional information on this device again. Also any source that provides a very large promotional unbrella that will fit into this adapter. I looked at the EZ up tents and the salesman indicated that one person could not put it up alone. Any comments from you guys that are using pop up tents for shade. :?: Thanks..

drill speed

Posted: July 19th, 2004, 10:24 pm
by gold star wsr
I found the very thing by going to google and typing in the word umbrella. It is a very clever device, but I didnt see any adaptation for a ball hitch, which is what I have on my truck :( .

.

Posted: July 19th, 2004, 10:59 pm
by Ridge Runner
Mike, You can also click on search,keyword-umbrella, author-rp4. Click on thread & scroll down to post by CPR.

Posted: July 20th, 2004, 2:31 am
by autocosmetics
Check out the AUTO-MO-BRELLA. I'm getting ready to order one myself. They only have the regular umbrella, but I'm going to buy an offset umbrella from another company. There's a lot of variety in quality for these umbrellas, prices range from under $100 to close to $400 for one that holds up to higher winds.

Posted: July 20th, 2004, 7:50 am
by Delta Kits
Ridge Runner wrote:Mike, You can also click on search,keyword-umbrella, author-rp4. Click on thread & scroll down to post by CPR.
Here, i'll save you the trouble! :)

viewtopic.php?t=1056&highlight=umbrella

Posted: July 20th, 2004, 4:11 pm
by CPR
I would also visit a local welding shop, I bet they can make one up for 30-40 bucks. Right now I'm using a cast iron umbrella stand, they are inexpensive and work good as long as you dont walk away from it.

Posted: July 30th, 2004, 12:51 pm
by Talbert
I put up my EZ-UP 10X10 by myself all the time. Only $70 at Academy Sports stores.

Posted: July 31st, 2004, 6:49 am
by CPR
A trick I use to open the ez up is to tie one leg to my trailer hitch, then you dont have to do the ez dance to set it up.