Page 1 of 1
Dull looking repair surface
Posted: April 18th, 2005, 1:12 pm
by Mr Bill
When I finish a repair and apply pit polish to repair surface and polish with a paper towel , my repairs dont look as shiny as the rest of the windshield. Any suggestions? :eusa_booh
Re: Dull looking repair surface
Posted: April 18th, 2005, 2:04 pm
by screenman
I always polish using the end of my finger and the smallest amount of polish possible and I mean really small, polish until the polish is dry takes only a couple of seconds try it. I have been using the same 1/4pint bottle of polish since 1988 and it looks like it has another 5 years to go.
Do not condem this method until you try it everyone in this trade I have shown it to is amazed.
Give me some feedback.
Re: Dull looking repair surface
Posted: April 18th, 2005, 2:11 pm
by CPR
I use a buffing wheel on the dremel, works for me.
Re: Dull looking repair surface
Posted: April 18th, 2005, 3:56 pm
by GlassStarz
More polish Grasshopper I also have this cool little nail file looking thing I bought for 2 bucks at the beauty supply its used to polish acrylic nails rub the surface a couple times bam shes shiney