Page 1 of 2

magnibond or premium bond?

Posted: July 11th, 2005, 8:33 pm
by scratchy
I have been using both and really can't decide which I like better. I seem to get quicker fill of star breaks with premium bond but like how the magnibond is fixing long cracks. Anybody here using just premium bond for everything all the time? I fixed a HUGE star break today with premium bond and couldn't have been happier with how it came together.

Re: magnibond or premium bond?

Posted: July 11th, 2005, 8:56 pm
by Hooky
I prefer premium bond for all chips but I prefer different resins for cracks. I dont have any experience with magnibond.

Re: magnibond or premium bond?

Posted: July 12th, 2005, 12:00 am
by screenman
Magnibond. Its a good all round resin and no where near as corrosive. we have tested both and while pleased with both we put Magnibond in front.

Re: magnibond or premium bond?

Posted: July 12th, 2005, 6:52 am
by Almost-New WSR
Gotta say Magnibond! Nothing really wrong with the premium, but the magni seems to move through the break quicker and more completely with less issues.

Love me some Magnibond!

Re: magnibond or premium bond?

Posted: September 30th, 2007, 5:57 pm
by ChipperFixer
I don't really know which thread to post this question, but since we are talking about RESINS, does any one know the shelf life of the Magnibond?

Re: magnibond or premium bond?

Posted: September 30th, 2007, 7:39 pm
by cazador
Check with DeltaKits . they represent Magnabond resins, get to the source of this product, that simple as 1 +1 = 2 .

Re: magnibond or premium bond?

Posted: September 30th, 2007, 7:57 pm
by cazador
I've been outof the USA for almost a month , went to Costa Rica to investigate this country, no one could inform me about the windshield repair business overthere , so I had to see it for myself. Came back with some mighty good information and acquired a good looking girlfriend too.I'll relocate to Costa Rica as soon all the red tape has been taken care off to become Permanent Resident. First will move in with my chica ,'till my house has been build and finished end off February 2008 and both of us will move to our new home in La Giralde , 25 km north of San Jose , the capital of Costa Rica. I'll need windshield repair sypplies 'cause I set up 5 dealers spread over the country .These Ticas are in the replacement business and want me to teach them the repair trade $$$$. Brent , when you read this , call me to talk business. Pura Vida , Ed dBa Dutchman Windshield Repair.

Re: magnibond or premium bond?

Posted: October 1st, 2007, 2:13 am
by chips1144
Good for you Pal, Sounds like a real successful trip.

Re: magnibond or premium bond?

Posted: October 1st, 2007, 5:21 am
by SGT
We use Magnibond exclusively at this point after switching from Premium Bond. We have had great success with this resin. There are such subtle differences between Premium Bond and Magnibond that I doubt anyone of us would really be able to tell the difference between the two without seeing the label. On paper Magnibond appears to be ever so slightly thicker and... Well, check out one of my earlier posts on this same topic as I listed all the resin specs for both Premium and Magnibond.

If you dont feel like wasting your time researching, the bottom line is...If you are considering Magnibond you can't go wrong but then again you cant go wrong with Premiumbond either. :D

Re: magnibond or premium bond?

Posted: October 1st, 2007, 7:02 am
by Brent Deines
ChipperFixer;26444 wrote:I don't really know which thread to post this question, but since we are talking about RESINS, does any one know the shelf life of the Magnibond?
The shelf life is 1 year in liter bottles and single shot syringes or 100 years in 15ml bottles. What I mean by that is that if you are ever unsatisfied with a Delta Kits windshield repair resin in 15ml bottles, we will replace it for free.

I used Premium Bond for 15 years, but now use nothing but MagniBond.