Page 1 of 1
Delta Injector
Posted: July 14th, 2005, 8:13 am
by brad333
does anyone know if the delta injector fits the glass mechanix bridge
do they have the same thread pattern
thanks
Re: Delta Injector
Posted: July 14th, 2005, 8:30 am
by Delta Kits
Brad,
Our injectors do NOT fit the GM bridge.
Re: Delta Injector
Posted: July 14th, 2005, 2:27 pm
by CPR
Jeff, can you get bridges with no injector hole drilled?
Hunt Hint........................................................
Re: Delta Injector
Posted: July 14th, 2005, 2:59 pm
by Delta Kits
CPR wrote:Jeff, can you get bridges with no injector hole drilled?
Nope....
Re: Delta Injector
Posted: July 14th, 2005, 4:12 pm
by Layne
Glad that you asked that question Brad.
I have 4 bridges that accept the novus injector---I wonder if the Delta injector matches those threads?
Layne
Re: Delta Injector
Posted: July 14th, 2005, 9:22 pm
by Repair1
I think with the right size hammer you can make any of them fit LOL. As far as the Novus style injectors fitting not even close they work completely different than the delta injector.
Happy Repairing
Brian
Re: Delta Injector
Posted: July 15th, 2005, 12:52 am
by screenman
For the cost of a couple of jobs you can buy the Delta bridge its a great bit of kit. Speculate to accumulate investment in tools etc. is tax deductable and can often give you a boost in motivation.
Re: Delta Injector
Posted: July 17th, 2005, 2:12 pm
by Lee
Screenman. You posted you were interested in Novus equipment once. Check out