Page 1 of 1

bullseyes

Posted: January 14th, 2006, 11:15 am
by kevgreen36
what is the best way to make a bullseye,i e when repairing a crack

Re: bullseyes

Posted: January 16th, 2006, 8:20 am
by CV Windshield Repair
You need to drill half-way thru the top layer of glass, be very careful not to drill to the laminate. Once you have done this take a sewing machine needle and insert it into the drill hole, make sure to hold it straight (90 degree angle) and tap it with anything that will give you sufficient weight.