Windshield Repair Forum

i was wonder how i can repair a crack that is too small.is it posible to inject the resin in a hole so small.i want to start this kind of bussiness but first i have a lot of quetion.thank you.

Hi Suzuki!

Are you talking about a crack that has no impact point? Or a surface chip where there is no underlying damage, just a small bit of glass missing from the surface?

the damage is a very small point in the middle and has like 3 legs of a half inch of lenght. thanks for the help.

You must drill into the center of where the legs intersect and pop a bullseye, if you do this the repair should be easy to do.

i'm new on this,in fact i haven't perform any type of repair yet since i got my kit a few days ago.my question is how i can pop a bulleye?

I use a sewing needle(machine type)and my razor blade holder as a tapper.I drill down approx. half way to the laminate and Gently tap the drilled hole with the sewing needle.You will need to practice this on a practice glass using different depths,tapper,etc. until you feel comfortable in creating the size bullseye(s) you need.

I'm sure that glass replacement shops will be glad to give you some old glass to play with since it's less they have to get rid of.